Carbon Technology from the Austrian high end manufacturer
The Squad 3.0 MTB 29 wheelset has exceptional features due to its special shape and is designed for mountain bikes and e-bikes with a frame size of 29 inches. Due to the hookless design with integrated tubeless-ready system, this XeNTiS wheel achieves a particularly high puncture resistance. An additional benefit is the asymmetrical rim profile, which achieves a higher lateral stiffness during acceleration and braking.
The elegant 12K surface finish gives this wheel set the finishing touch and makes the heart of every carbon enthusiast beat faster. The XeNTiS XH002 hubs with 6-hole brake disc mounts provide the necessary reliability in terms of mileage. In addition to the standard installation width, these are also available as BOOST versions.
XeNTiS hubs The XeNTiS development is not limited to the production of high quality carbon rims, but also extends to the development and manufacture of in-house hubs. The product range is extended by the cooperation with DT Swiss. Long-term tests, bench testing and ultimately racing commitments contribute to the excellent results.
RFID XeNTis wheels are 100% hand made in Austria. All wheels are fitted with a unique RFID chip that allow exact information to be traced and extracted such as origin and manufacturing specifications.
UV-resistant Due to a clear coated surface finish all XeNTiS wheels are UV protected.
model: SQUAD 3.0 MTB 29
design: MATT BLACK
carbon fiber: 12K-Carbon
dimension rim: 622x30,5 Hookless, tubeless ready
tyres: clincher tyres 54-622 to 65-622
tyre inflation pressure: 3,5 bar (29x2,10 Zoll) /52 psi in (54-622) 3,2 bar (29x2,20 Zoll) /46 psi in (57-622) 2,9 bar (29x2,35 Zoll) /41 psi in (60-622) 2,6 bar (29x2,50 Zoll ) /37 psi in (62-622) 2,5 bar (29x2,60 Zoll) /36 psi in (65-622)
Tubeless Ready System Due to the TUBELESS READY system all XeNTiS clincher wheels are ridable without an inner tube. Because of the special rim base the tyre fits exactly to the rim flange. This application guarantees a significant increase in puncture protection and riding comfort.
Asymmetrical rim cross-sections The ASYMMETRIC RIM PROFILE is used in combination with rear and disc-brake hubs As a result, the spoke tension left and right is almost equal and therefore the lateral stiffness of the entire wheel increases.
XeNTiS products may not be exactly as shown, specifications subject to change without notice. Weight tolerances (+/- 5%) may occur due to the manufacturing process. Errors and ommisions excepted!
XeNTiS has taken up the challenge to set new benchmarks in wheel construction. During the predominantly manual production process, XeNTiS has gathered extensive know-how using carbon composite materials. The cooperation between the XeNTiS R&D team and experienced athletes has played a vital part in the continuing development of next generation wheels.