The Keo Blade 2 is tried and tested! It is definitively adopted by the greatest teams and the greatest champions. Contrary to all the existing systems, the Keo Blade uses a deformation features. The maximum couple is reached at the start of the deformation which allows very precise engagement and very simple release. The strategically placed carbon blade in the centre of the pedal also gives it an aerodynamic profile. Its very wide support surface and its light weight enable the racer to fully express his power. The Keo Blade 2 is the top automatic pedal.
"..We have designed and developed the Keo Blade 2 dreaming that we could push the revolutionary concept of the carbon blade that made the Keo Blade Carbon such a success even further. The dream became a reality. Presenting an even lighter pedal while increasing the support surface is a great challenge that we have met. The Keo Blade 2 is more aerodynamic thanks to the integration of its carbon blade in the centre of the pedal, which will interest the fans of a high performance and design product..."
3 CARBON BLADES AVAILABLE
- Carbon body with an aerodynamic profile
- Carbon blade for strong release and tightening
- Maximum width and support surface (64mm / 700mm2) / stack height 13mm = maximum power transfer
- Permanent cleat stop contact = better stability
- Available in titanium axle (Ti) or chromoly+ (Cr)
- Available in 3 levels of release tension : 12, 16 or 20
- 90gr in version Ti (248gr. pair with stops cleats and screws)
- 110gr. in Cr version (248gr. pair with cleats and screws)
- Delivered with grey Keo Grip cleats
The Keo Blade 2 carbon blade was designed to provide rigid coupling and release much more quickly at the end of disengagement. To satisfy all cyclists, the Keo Blade 2 exists in 3 indicative tension levels for release: the version 12 for most cyclists, the 16 for racers looking for improved support. Finally, the 20, for cyclists looking for maximum hold. It is possible to move from one version to the next by changing the blade with a special tool
MAXIMUM SUPPORT SURFACE
At 700 mm2 and 64 mm wide, the Keo Blade 2 has the largest support surface ever. To achieve that, the LOOK engineers have optimised the contact between the foot rest and the plate in stainless steel moulded in the body of the Keo Blade 2. The footrest remains in maximum contact with the pedal, irrespective of the pedalling angle.
A VERY HIGH QUALITY AXLE
For improved efficiency in pedalling, the Keo Blade 2 reduces the stack height by using an oversize axle in Titanium or Chromoly. Two ball bearings and a needle bearing ensure greater durability. With the purpose of providing a very reliable product LOOK imposes tests that exceed the applicable norm by far. LOOK axles are only validated after extreme stress and wear tests.