CarbonTi conversion kit

Conversion kit quick release rear - Weight 30.7g - XHMSLCKQRR
Conversion Kit consists of a rear quick release and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the X-Hub MTB SL rear hub from 12 mm thru axle to quick release.

Compatibility

• This kit is not compatible with X-Hub SP Center Lock hubs.
• This kit is not compatible with the pre-2012 X-Hub MTB.

Conversion kit quick release front - Weight 18.9g - XHMSLCKQRF
Conversion Kit consists of a front quick release axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the X-Hub MTB SL front hub from QR15 to quick release.

Compatibility

• This kit is not compatible with X-Hub SP Center Lock hubs.
• This kit is not compatible with the pre-2012 X-Hub MTB.

Conversion kit QR12 - Weight 17g - XHMSLCKQR12
Conversion Kit consists of a front QR12 axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned or purchased separately.

Compatibility

• Converts the X-Hub SL Disc or SP Disc front hub from quick release or QR15 to QR12.
• This kit is not compatible with the pre-2012 X-Hub MTB.

Conversion kit QR15 - Weight 16.3g - XHMSLCKQR15
Conversion Kit consists of a front QR15 axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the X-Hub MTB SL front hub from quick release to QR15.


Compatibility

• This kit is not compatible with the pre-2012 X-Hub MTB. Made in Italy.

Conversion kit X-12 - Weight 32.3g - XHMSLCKX12
Conversion Kit consists of a rear 12 mm thru axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned.

Compatibility

• Converts the rear X-Hub SP Disc or X-Hub SL Disc hubs from quick release to 12 mm thru axle.
• This kit is not compatible with the pre-2012 X-Hub hubs.

Conversion kit X-RS-1 - Weight 39g - XHMSLCKRS1
Conversion Kit consists of a front X-RS-1 axle and the relative lateral end and the bearing preload ring (BPS).


Compatibility

• It converts the X-Hub MTB SL hub from quick release or QR15 to X-RS-1 (compatible with the RockShox RS-1 fork. It is necessary a recentering of the front wheel with an offset of about 2.5 mm in the opposite direction of the disc rotor.
• This kit is not compatible with the pre-2012 X-Hub MTB.