tune Prince rear hub Boost 6-hole standard

Product information "Prince Boost rear hub"
The Prince Boost is chosen by elite racers around the world! A super light hubshell, Ceramic- or Endurance-bearings and a reinforced freewheel body offer you superb race-day performance! Each material was selected to achieve the lowest weight possible. The aerospace grade Aluminium with increased fatigue strength has been used to obtain the fine geometrical tolerances and the complex shape. The flange geometry has been optimized to increase the lateral stiffness of the wheel. Just like any Formula One car this hub is ideal for competition and just like any race car this hub needs an inspection after each "Grand Prix" in order to maintain its top performance.

Technische Daten

• Colours: available in all Tune anodised colours
• Max. rider weight: 90kg
• Max. system weight: 105kg
• Weight: from 206,6g
• Hole count: 28 or 32 for 3-cross lacing
• Max spoke tension: 1100N
• Axle type: available in 12x148mm with Aluminium Endcaps
• Bearing Type: left side Endurance-bearings, right side Standard-bearings
• Freewheel type: reinforced Endurance Freehub
• Freewheel standard: available with XD, XDR, Shimano HG10 or Shimano MicroSpline*
• Brake type: disc brake
• Brake Interface: 6-Bolt disc-brake interface
• Notes: Threadlock residue must be removed before installation. The brake rotor must be fastened with a calibrated torque wrench to a max torque of 5Nm.
• Recommended spokes: Sapim CX-Ray, D-Light or equivalent spokes

Dimensions for 6-bolt with axle type 148mm

• Flange distance left: 35,2mm
• Flange distance right: 22,2mm
• Pitch circle left: 47mm
• Pitch circle right: 57mm
• Diameter spoke holes: 2,5mm
• Offset spoke hole left: 1,5mm
• Offset spoke hole right: 1,5mm

---

---