Product information "TSR35 Disc front wheel" If you are searching for a crazy good looking and super versatile wheelset...look no further! Our TSR35 disc are made for you! The aero profile section with 35mm height helps you to stay efficient in flat rides whereas its low weight and lateral stiffness will ease your climbing effort. The disc brake interface ensures perfect braking under all conditions!
Its modern black matte anodized finish will convince both modern superbike-lovers and classic-bike fans. The rims are anodized twice with lasered logos.
Take care, with this wheelset you might never want to switch to carbon wheels!
Technical data front wheel
Weight: from 722g
Hub Type: KillHill CL 24 holes with Aluminium Endcaps and standard bearings
Spokes: SAPIM CX Ray Aero Black Inox
Max Spoke Tension: 1100N
Max. rider weight: 100kg
Max. system weight: 110kg
Rim Inner Width: 19,9mm
Rim Outer Width: 24mm
Rim Height: 35mm
Rim standard: 700c clincher, 700c x 24mm, 622 x 19,9mm
Tubeless Ready: Yes
Recommended Width Tubeless Tape: 22mm
Recommended Length Tubeless Valve: 60mm
Tyres and max. pressure: 25mm/7bar 28mm/6,5bar - 33mm/5bar - 45mm/3,5bar
Brake Interface: Centerlock* disc-brake interface, 6-Bolt with adapter
Note: Screw on the Centerlock* lockring and tighten it with max. 40Nm.
Colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
*Center Lock rotor mounting system licensed by Shimano
In case that the specific option you are looking for (e.g. CL/6-hole, freehub body or axle standard) is not listed we ask you to place the order using a dummy wheelset and drop a short comment regarding the configuration you exactly need.
The color is referring to the anodization color of the hubs.