Tatze Contact platform pedals CNC (10 pins each side) L

The CONTACT CNC Large is for everyone who likes big things.

A pedal should fit your foot on the one hand and meet your needs on the other. That's why the CONTACT CNC is available in different sizes, different colors and with PINS that can be used on both sides. When delivered, these are screwed in with the short side up, but if you like it particularly aggressive, you can turn the PINS around and thus lengthen them.
With the CONTACT CNC Large, great importance was attached to stability and yet the pedal is lightweight for its size at 350g. The pedal avoids unwanted contact with the ground thanks to its thin design and the open construction allows dirt to fall through the pedal.
For the bearing of the CONTACT CNC, we use a high-quality IGUS JSM plain bearing on the inside and two ball bearings on the outside. Two double lip seals are installed for sealing, which protect the bearings from dirt and moisture.

• Here are the specifications at a glance:
• Platform for shoe size 42 - 50
• 10 non-slip, concave PINS
• Aluminum 6061-T6 pedal body
• High strength steel axle
• Bearing: IGUS plain bearing + 2x deep groove ball bearing (double sealed)
• Weight: 350g
• Developed and tested in Tyrol/Austria