- CYCLUS TOOLS Tap and die for internal crank thread M24x1 for cutting
- Tap and die to create a new M24x1 internal thread into the crank. Essential requirement: an "old" cutter core hole thread M24. If this is not the case, the tool or the crank may be permanently damaged.
- You can create a cutter hole core by milling out a M22x1 internal thread with the CYCLUS TOOLS milling cutter: art. 720235. When installing or removing the crank arms we highly recommend to re-tap the threads!
- To achieve the best possible result with the milling cutter, we recommend using the correct/fitting guide.
- Make sure that you are using the right cutting oil when milling or cutting!
- Rate this product
Rate this product
Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀 - Show all items from Cyclus