OSPW X for SRAM Rival & Force 1 Type 3 The fastest oversized pulley wheel system in the world is also available for SRAM Rival & Force 1 Type 3 derailleurs.
Featuring 14-tooth (upper) and 18-tooth (lower) pulleys with a narrow-wide profile, the OSPW X System for SRAM 1x is available fitted with CeramicSpeed standard (4 years warranty) coated or SLT bearings (lifetime warranty). The unique narrow-wide tooth profile of the pulleys ensures durable chain retention.
The system is fitted with a custom designed, strong carbon fiber pulley cage assembly for long durability and light weight. The cage design allows you to choose between two spring tension settings to customise performance and reduce chain drag. We recommend initial setup in the lower spring tension. This has been designed to leave the clutch mechanism fully functional for chain retention.
In the event that the low spring tension does not provide adequate shift quality on real rough roads, you can increase it to the high spring tension which corresponds to the factory settings.
Thanks to the high-quality CeramicSpeed Bearings inside, your product will benefit from 3-5 times longer lifetime compared to stock.
The OSPW X System for SRAM 1x has been tested to deliver 30-40% less friction than conventional systems.
Together with the top quality CeramicSpeed Bearings inside, the product is completely developed and handbuilt in Denmark.
The OSPW X System for SRAM 1X is compatible with: SRAM Force 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock
SRAM Rival 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock
The cage is NOT compatible with Type 2.1 clutch. Technical Specifications: - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower narrow-wide pulley wheels
- Pulley Wheel Material: Aluminium
- Cage Material (OSPW): Carbon reinforced PA
- Bearing options: CeramicSpeed Standard or Coated
- Compatibility:
- SRAM Force 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock*
- SRAM Rival 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock*
- NOT compatible with Apex 1 due to difference in cage lock design
- Compatibility Cassette: Fits cassettes up to 42-tooth
- Spring Tension Settings: 2 spring tension settings
- Speed & Discipline: 11 speed for Road and Gravel/Cross
Attention! Only install this product on derailleurs with an 8 o’clock cage lock position. It will not fit derailleurs with a 5 o’clock cage lock position.
The Coated Advantage
Lifetime Warranty Program
CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our unique coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of theCeramicSpeed Balls results in virtually no wear on the bearing.
The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
Within our comprehensive R&D program, the special coating has been developed in cooperation with a European coating specialist. Applied to the bearing’s steel races, through an advanced process that ensures an even, smooth and homogeneous surface, the coating formula improves even further the high quality of CeramicSpeed Bearings.
Thanks to the coating’s high resistance to corrosion – even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible. We recommend choosing CeramicSpeed Coated Bearings for unmatched longevity and incredibly low friction.
