Cane Creek Helm Coil MKII Boost suspension fork 15x110mm 28.6-40 matte noir 27.5'/650B 44mm

We are proud to announce the release of the new Helm MKII suspension fork. The Helm MKII will be our first major revision of the Helm fork lineup and improves on its predecessor in nearly every way.

The HELM MKII newly designed damper features a new compression and mid-valve circuit for increased support and control while a new SKF oil seal head and 2.5 weight damper oil reduce friction and provide a more supple ride-feel. The HELM MKII features a variety of external usability improvements including easier to turn knobs and a D-LOC bolt-on axle.



Specs

• Weight: 2260 grams
• Damping: High Speed Compression, Low Speed Compression, Low Speed Rebound
• Adjustments: High speed compression, Low speed compression, Low speed rebound, Indexed travel adjust system, Spring pre-load adjust
• Spring: 55 lb Lightweight Coil Spring included from factory, 35-45-55-65 lbs/in springs available
• Stanchion Diameter: 35mm
• Min. Brake Rotor Size: 180mm. *If you are using a Hope Tech brake on a Helm fork, you will need to use a 200mm rotor with appropriate adapter.
• Travel: Optimized for 130-160mm of travel
• Travel Adjustments: Internal, 10mm Increments (160mm down to 130mm) (No additional parts required)
• Axle / Spacing / Offset : "D-Loc" 15mm Bolt-one thru axle / 15mm x 110 BOOST spacing / 44mm

Spring Recommendations:

• 35lb spring AAG0421 RED - (90-120lbs rider)
• 45lb spring AAG0422 BLACK - (120-160lbs rider)
• 55lb spring AAG0424 GREEN - (160-200lbs rider) ** Stock Spring in Helm Coil
• 65lb spring AAG0426 BLUE - (200-240lbs rider)

With changes in internal travel amount, rider positioning on the bicycle, bicycle head angle, and rider ability/style, spring rates will vary. For assistance please contact Cane Creek or your nearest Certified Service Center

Fully revised damper tune

• New compression and midvalve circuit for increased support and control
• New SKF low friction oil seal head cartridge
• High performance damper oil from Motorex

New SKF low friction wiper seals installed in the castings.