- We are proud to announce the release of the new Helm MKII suspension fork. The Helm MKII will be our first major revision of the Helm fork lineup and improves on its predecessor in nearly every way.
The HELM MKII newly designed damper features a new compression and mid-valve circuit for increased support and control while a new SKF oil seal head and 2.5 weight damper oil reduce friction and provide a more supple ride-feel. The HELM MKII features a variety of external usability improvements including easier to turn knobs and a D-LOC bolt-on axle.
Specs
- Weight: 2340 grams
- Damping: High Speed Compression, Low Speed Compression, Low Speed Rebound
- Adjustments: High speed compression (10 positions), Low speed compression (17 positions), Low speed rebound (10 positions), Indexed travel adjust system, Spring pre-load adjust
- Spring: 55 lb Lightweight Coil Spring included from factory. 35-45-55-65 lbs/in springs available
- Stanchion Diameter: 35mm
- Min. Brake Rotor Size: 180mm. *If you are using a Hope Tech brake on a Helm fork, you will need to use a 200mm rotor with appropriate adapter.
- Travel: Optimized for 130-160mm of travel
- Travel Adjustments: Internal, 10mm Increments (160mm down to 130mm) (No additional parts required)
- Axle / Spacing / Offset: "D-Loc" 15mm Bolt-on thru axle / 15mm x 110 BOOST spacing / 51mm and 44mm
- Max Tire Size: 64mm wide by 749mm tall (29) / 75mm wide by 739mm tall (27.5+)
- Color: Gloss Black
Fully Revised Damper Tune
- New compression and midvalve circuit for increased support and control
- New SKF low friction oil seal head cartridge
- High performance damper oil from Motorex
- New SKF low friction wiper seals installed in the castings.
- Rate this product
Rate this product
Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀 - Montrer tous les produits Cane Creek