tune CANNONBALL 2.0 Lefty disc moyeux front

Cannonball 2.0 - 99 gram
Tuning for your Cannondale

If a good weapon of mass destruction existed, it would be our Cannonball hub: with the 99 gram Lefty hub you tune your Cannondale to under the stock weight. It is durable due to the resilient big left flange and the special bearings. They are packed to a higher degree ; therefore we use special grease. What does it do? Cannonball accelerates as a blunger in a mixer and is especially durable. Using the cover cap you can dismount the wheel easy and quick. The Cannonball comes in the 6 hole „IS“ standard and is available in all tune anodising colours. Thanks to our in-house manufacturing in Buggingen we offer a complete spare part service up to the smallest end cap.

Cannonball 2.0 for Lefty Supermax and Lefty 2.0:
The new Cannonball 2.0 will be available as from middle of March 2015 and is conceived for for Lefty Supermax and Lefty 2.0. The additional use of an adapter is not anymore necessary! What is the difference between the Cannonball and the new Cannonball 2.0? The disc brake mount is staggered with 7mm towards the fork. This is why the Cannonball 2.0 is therefore compatible with the new Lefty fork without an additional adapter. Due to the flange which is staggered with 7mm towards the fork and sloped towards the spoke direction, a very stable and stiff wheel might be assembled which sets standards respective to the steering precision. The Cannonball 2.0 fork is not compatible with forerunners! Old Leftys are not applicable with the Cannonball 2.0.

Tune uses special bearings which are like that not available on the market! The bearings identify themselves through a special grease and a higher filling degree. Besides o fit they are double abradant sealed and maintenancfree.

Available in all Tune-anodized colors here in our shop!

Specs Cannonball 2.0

• Body: aluminium (body, bolt & cover)
  
• Manufacturing methods: CNC turned, one-piece body, anodized, laser etched
  
• Number of holes: 28/32
  
• Disc brake mount: IS 2000
  
• Bearings: 2 deep-groove ball bearings 61802 & 61805
  
• Seals: double contact seals
  
• Pitch circle: 55,5/41 mm
  
• Flange to center: 27,2/32,1 mm