Xentis MARK3 rim brake clincher tubeless ready 622x18C wheel

Xentis MARK3 rim brake clincher tubeless ready 622x18C wheel

MARK3 is the triathlon flagship among the XeNTiS wheels. This monocoque carbon wheel is manufactured using the OSH process and differs from the conventionally laced wheel in that it produces spokes and rim in one shot. This wheel concept has a comparable drag coefficient to full disc wheels, but is much less affected by crosswinds in stormy conditions. Furthermore this design enables the compensation of high loads and guarantees unbeatable low maintenance-afford even after a long mileage.

Due to the Tubeless-compatible system, this, aerodynamically perfected clincher wheel, can also be ridden tubeless. The patented braking surface (XBP) of XeNTiS guarantees best braking performance in wet and dry conditions. There is no wear of the braking surface and in addition to the XeNTiS brake pads, the use of standard brake pads is also possible.



Design: matt white or matt black depending on variant
Carbon fiber: 3K-Carbon
Dimension: 622 x 18C tubeless ready
Tyres: clincher 23-26mm
Max. tyre inflation pressure: 8,8 bar (23-622) /127 psi in (23-622) - 7,5 bar (25-622) /108 psi in (25-622) - 7,0 bar (26-622) /101 psi in (26-622)
Brake surface: XBP Carbon (patented)
Rim depth: 42 mm
Outer Rim width: 26 mm
Inner Rim width: 18 mm
Spoke count: 5
Hub front: XeNTiS XH002 (5-100mm)
Hub rear: XeNTiS XH003 (5-130mm)
Compatibility: Shimano / SRAM 11-Speed, Shimano 11/12-Speed, SRAM XD(R) 12-Speed, Campagnolo 11/12-Speed - depends on choosen freewheel above
Accessories: XeNTiS warranty card, XeNTiS Wheelbag, XeNTiS Rim tape, XeNTiS quick release
Weight per wheelset: 1.698g
Max. combined rider weight: 120kg