- Wolf Tooth Front Axles are lightweight, easy to use, and friendly with your fork. They use a captive steel washer under the head that protects your fork, transfers more of the tightening torque to clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it. The new updated Wolf Tooth Front Axles now have an o-ring that makes them compatible with the Wolf Tooth Axle Handle Multi-Tool.
The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes.
An O-ring on the inside axle's end locks the Axle Handle Multi-Tool in place so it is secure while riding. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet.
- Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Designed for Wolf Tooth front and rear axles
- Weight: 110 mm / 87 g
- Material: 7075 T6 aluminum with plated steel washer
- Diameter: 15 mm
- Tool interface: 6 mm hex key
- Torque spec: 12-15 Nm
- Thread spec: 14x1.5
- Thread length: 15mm
- Made in the USA
Click to see axle dimensions https://cdn.shopify.com/s/files/1/0230/9291/files/Front_Axle_Measurement_Guide_02.pdf?651 - Rate this product
Rate this product
Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀 - Montrer tous les produits Wolf Tooth