tune FAT KONG MTB disc moyeux rear

Montrer tous les produits tune
  • FAT KONG – 240 gram
    Offset-Hubs for Fatbikes


    Optional Ceramicspeed Upgrade, click here

    Based on longtime experiences with our KING and KONG hub combination, we have developed an offset hub set for Fatbikes.

    With 170mm/190mm (quickrelease) respective 177mm/197mm (12mm thru-axle) the FAT KONG is an unknown territory.
    But with only (off) 240g but still tune typical and primed for all clamp and drive systems.

    Due to similar flange distances of the offset hubs, both wheels can be assembled symmetric. The result is highest stiffness and endurance.
    The hub body has been stiffen towards the spokes in favor of equal load spreading. Besides of it the flanges are
    sloped towards the spokes and thus towards the direction of load.

    As a whole of all measures a stable, durable and lightweight product has been produced, simply Made in Buggingen/Germany.

    The utilised titan alloy TiAI6V4, was designed for excellent fatigue strength, a high standard of crack
    initiation and crack growth, even in humid conditions!

    Tune uses special bearings which are like that not available on the market! The bearings identify themselves through a special grease and a higher filling degree. Besides o fit they are double abradant sealed and maintenancfree.

    Specs FAT KONG
    • Body & Freewheel: aluminium
    • Pawl & Toothing: titanium
    • Manufacturing methods: CNC-turned, one-piece body, as well as free wheel
    • Number of holes: 32
    • Hub spacing: 170 / 177 / 190 / 197 mm
    • Bearing : 4 deep-groove ball bearings
    • Sealing: double contact seals
    • Clamping: Quickrelease / 12 mm Thru-axle
    • Freewheel: 8-/ 9-/ 10-speed Shimano/ SRAM, 8-/ 9-/ 10-/ 11-speed Shimano/SRAM, Campagnolo, SRAM XD
    • Pitch circle Ø: 55,5mm
    • Flange to center (l/r)
    • FatKong 170 38,0mm/38.4mm
    • FatKong 177 37.7mm/38.7mm
    • FatKong 190 49,0mm/47.6mm
    • FatKong 197 48.7mm/47.9mm
  • Rate this product

    •  
    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!


  • Annotations


    Si l'option spécifique que vous recherchez (par ex. CL/6-trou, corps de moyeu libre, axe standard ou couleur d'anodisation) ne figure pas dans la liste, nous vous prions de passer la commande en utilisant un moyeu factice et de laisser un bref commentaire concernant la configuration dont vous avez exactement besoin.

    Si vous avez des questions ou des changements de prix, nous vous contacterons immédiatement après avoir passé votre commande.
  • Les clients qui ont regardé ce produit ont aussi regardé ceci:
2020 cycling season start super-SALE
Stock blowout at bargain prices
Vous êtes ici:
Ce produit est manufacturé à la main en Allemagne