CarbonTi X-Hub SP straightpull Boost 148mm moyeux rear

X-Hub SP Boost 148mm - 182-196g

X-Hub SP Boost 148 is a very light and sophisticated product and it is intended for Cross Country or Marathon use. Warranty voids when used on an electric-assisted bicycle (E-bike). X-Hub SP Boost 148 is compatible with the Boost 148 standard, it is not possible the conversion to the classic standard quick release neither with the X12. The fixing system of the disc rotor is six holes International Standard. This Hub is compatible with Shimano Micro Spline 12s cassettes and allow conversion with SRAM XD 11-12s and Shimano 10-11s MTB cassettes (with 1.8 mmspacer only). X-Hub SP SP Boost 148 presents refinements and a mechanical stiffness/weight ratio at the highest level, the Al7075-T6 body is machined from solid and is lightened by meticolous works with CNC machines. The Al7075-T6 17mm diameter axle has a variable thickness, two high quality sealed bearings with external preload system provide reliability and smoothness. The freewheel mechanism is protected by a lip seal and itis provided by a titanium toothed ring to 56 teeth with four points of engagement.

Product Specification

• Spoke hole drilling: 28
• Spoke hole: Ø 2.5 mm
• Disc flange drilling: Ø 47.50 mm
• Right flange drilling: Ø 54.50 mm
• Axle diameter: 17 mm
• Axle width: 148 mm
• Frame attachment: 12mm thru axle
• Disk attachment: International Standard (6 holes)
• Recommended hub spoke tension: 120 KgF (Max 130 Kgf)
• Recommended rotor bolt tightening torque: 4 Nm w/med. threadlocker (Max 5 Nm)