XMC 1200 SPLINE Our most versatile wheel, combining the best of all worlds in a strong package.
The XMC 1200 SPLINE 30 is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. And with a 30 mm internal width, it is made for wide rubber. The hubs feature the latest incarnation of our Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence.
- Hub type: 180 with Ratchet EXP 36
- Rim: Carbon, Clincher
- Inner width: 30 mm
- Spokes: DT aero comp straightpull, DT aerolite straightpull
- Spoke pattern 3-cross (1:1)
Technology We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.
Tubeless technology All DT Swiss wheelsets are tubeless compatible and the ASM versions come tubeless ready, equipped with tubeless tape and valves.
Ratchet EXP Updated DT Swiss Ratchet Hub design. Easier to maintain and service. Fast disassembly and easy to convert. Lighter than the previous version. Reduced wear and therefore increased reliability and lifetime.
Engagement Angle In the development of an optimal freewheel system we believe that three factors have to be considered: reliability, weight and points of engagement. But you must bear in mind that there is a trade-off between all of these three dimensions. We still believe that a system with
36 points of engagement (10º) represents the best optimization within this three dimensional perspective in terms of reliability, weight and points of engagement.
Pro Lock Pro Lock is a process where a patented, dual compound, adhesive liquid is injected into the nipple thread, allowing for extremely durable wheel builds. By threading the nipple onto the spoke the adhesive is activated and starts to harden. Retruing the wheel is still possible after the adhesive has hardened completely, with only a minimal decrease of its thread-lock function.
WXMC120TEDRCA10941: Rear Wheel XMC 1200 SPLINE 29 - 30 mm CL 12/148 mm SRAM
WXMC120TGDRCA10934: Rear Wheel XMC 1200 SPLINE 27.5 - 30 mm CL 12/148 mm SRAM
WXMC120BEIXCA10939: Front Wheel XMC 1200 SPLINE 29 - 30 mm CL 15/110 mm
WXMC120BGIXCA10932: Front Wheel XMC 1200 SPLINE 27.5 - 30 mm CL 15/110 mm
Products from DT Swiss cannot be sold to the United States anymore.