Campagnolo Bora WTO 45 Dark wheelset front+rear

Bora WTO 45

The Aero carbon wheel family is enriched with the 45mm profile for a wide audience. The rim design allows maximum aerodynamic penetration and with a certain angle, the wind even becomes a valuable ally for the athlete. Aerodynamic hubs and ceramic USB cone bearing shell system in the hubs: Every design decision on these wheels is made to optimise performance.

The 19mm internal rim width allows the fitting of 23mm, 25mm and 28mm tyres. Moreover, with the 2-Way Fit version, Campagnolo once again offers the proven technology that allows perfect compatibility with clincher and tubeless tyres. If the goal of these wheels is extreme performance, safety is guaranteed by Campagnolo AC3 technology (All Conditions Carbon Control), a guarantee of safe and modular braking in all weather conditions. Available versions: Bright and Dark Label, Campagnolo or HG11 freewheel body.

Weight 2-Way Fit: 1496g.

45mm... but Aero

• The rim design allows for maximum aerodynamic penetration as the wind, when acting on the rim at an angle between 12° and 19°, gives the triathlete momentum
• The slim design of the hub in the central part reduces the face of the component and the particular design of the flanks favours stall
• The aero-elliptical cross-section of the 18 front spokes drastically reduces rolling resistance

.

Fast and... smooth

• The proven USB cone bearing shell system ensures the correct sliding of the ceramic bearings
• The 2-Way Fit profile not only allows the installation of the clincher tyre, but also of the tyre with the lowest rolling resistance currently available: tubeless
• The inner width of 19mm allows the mounting of tyres with 23, 25 and 28mm with perfect connection of the rim-tyre system

.

Decision for aerodynamics ... but from Campagnolo.

• The smoothness you've come to expect from Campagnolo gets even better, despite the aerodynamic rim design in the 45mm profile.
• The design of the wheel makes it possible to reduce power loss to a minimum by transferring all the power produced by the cyclist to the asphalt.
• A 45mm profile with a wheel pair weight of less than 1500g makes this the optimal wheel for hilly trails.

Specifications
Spokes

• 18 stainless steel spokes with elliptical cross section at the front
• 21 stainless steel spokes with elliptical cross-section at the rear, grouped with G3 geometry
• Anti-rotation system on the radial spokes

.

Compatibility

• Campagnolo sprocket set 10/11/12
• Sprocket set Shimano / SRAM 10/11
• Sprocket set SRAM 12 (via purchase of the special body as a spare part)

Hub

• Monolithic hub in black aluminium
• Ceramic USB cone bearing shell
• Hub stop: 100mm front, 130mm rear - [list]Hub material: aluminium
• Shaft material: aluminium
• USB cone/bearing shell system

Rim

• Tread height: 45 mm
• Rim material: Carbon
• Rim cross-section (height/width): 45/26.5 mm
• Inside width of the rim: 19 mm
• AC3 technology on the brake flank
• Graphic design Water Transfer

• [b]Reifen
• Clincher tyre
• Tubeless tyres

Mounting

• The Bora WT0 45 wheel is assembled entirely by hand by a Campagnolo expert and 100% checked using instruments with electronic control. This process ensures the maximum performance and reliability of all Campagnolo brand wheels.

.