Contactez-nous

tune Schwarzbrenner 45 Skyline rear wheel Mag Skyline 24H QR5

Ajouter au panier

Vu ailleurs moins cher ?

Ce produit est manufacturé à la main en Allemagne
  • Product information "Schwarzbrenner 45 Skyline rear wheel"
    The Schwarzbrenner45 Skyline is our lightest Aero rim brake wheelset equipped with our Skyline hubs with carbon ring reinforcements and ceramic bearings.

    The Schwarzbrenner45 Skyline have been designed for people who simply cannot decide whether they want to attack big climbs or go all-out on flat streets - or maybe both. To keep it short: it's a superlight Swiss Army knife (or rather a German one). You will almost appreciate steep climbs thanks to its lateral stiffness and its ultra-low weight. During tough descents the Carbon Rims produced by a braiding robot will endure potholes as they offer good impact resistance! You do not have to be concerned too much about the heat resistance of the rims, with a temperature resistance of 245°C you can simply focus on the road. In flat terrain the rims 45mm aero profile and the SAPIM CX-Super Aero spokes will help you to set new personal records!

    Technical data rear wheel
    • Weight: from 682g
    • Hub Type: Mag Skyline 24 holes with carbon ring reinforcements and ceramic bearings
    • Spokes: SAPIM CX-Super Aero Black Inox
    • Max. Spoke Tension: 1100N
    • Max. rider weight: 90kg
    • Max. system weight: 100kg
    • Rim Inner Width: 17mm
    • Rim Outer Width: 27mm
    • Rim Height: 45mm
    • Rim standard: 700c clincher, 622 x 17mm
    • Tubeless Ready: Yes
    • Recommended Width Tubeless Tape: 18mm
    • Recommended Length Tubeless Valve: 60mm
    • Tyres and max. pressure: 23mm/8,5bar 25mm/8bar - 28mm/7,5bar - 33mm/5bar
    • Axle type: 5x130mm
    • Nipples: Inverted SAPIM Polyax Alu 10mm
    • Freewheel types: 3Teeth Skyline or 6Teeth Skyline with twice as much engagement points
    • Freewheel standard: available with XDR, Shimano HG10, Shimano HG11 or Campagnolo
    • Recommanded brake pads: SwissStop BlackPrince
    • Note: Brake pads and braking surfaces have to be cleaned periodically
    • Colours: for hubs, nipples and Tune decals, available in all Tune anodised colours




    Annotations


    Si l'option spécifique que vous recherchez (par exemple CL/6-trous, corps de moyeu libre ou essieu standard) ne figure pas dans la liste, nous vous prions de passer votre commande à l'aide d'une paire de roues factices et d'ajouter un bref commentaire concernant la configuration dont vous avez besoin exactement.

    La couleur se réfère à la couleur d'anodisation des moyeux.
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
  • Montrer tous les produits tune
délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines