tune Schwarzbrenner 45 Disc Centerlock front wheel KillHill 24H

The Schwarzbrenner 45 Disc 3.0 feels comfortable in any terrain, whether on the uphill, downhill or on the flat. The wheel is equipped with our best-seller KillHill, the hub is milled in our factory from aerospace aluminum and is characterized by its high fatigue strength and low weight. The anodized finish provides great looks and prevents corrosion even under the harshest conditions. Available in the seven classic tune anodized colors.
Hand assembled in Buggingen in the Black Forest, the Schwarzbrenner 45 Disc 3.0 guarantees the highest quality standards. The carbon rim is made by a braiding robot in Germany, which makes it very durable and has a high impact resistance. The considerable lateral stiffness and very low weight are ideal for rolling it on hilly terrain. The 45mm high NACA profile of the rim offers excellent aerodynamic performance. Also, the rim is made of special epoxy resin that can withstand temperatures of up to 245°C. So you don't have to worry about the heat resistance of the rim, but can fully concentrate on the road. The SAPIM CX-Ray spokes ensure maximum stiffness with minimum weight.

The Schwarzbrenner 45 Disc 3.0 is for all riders who can not decide between big climbs and time trials. Why not do both with this versatile Swiss (sorry, German) pocket knife of a wheel?

Technical data:

• Weight from: 668g
• Hub type: KillHill CL 24 holes with aluminum end caps and standard bearings
• Spokes: SAPIM CX-Ray aero black Inox
• Max. Spoke tension: 1100N
• Max. Rider weight 100kg
• Max. System weight: 110kg
• Inner width rim: 17mm
• Outer width rim: 27mm
• Height rim: 45mm
• Dimensions rim: 700c Clincher, 622 x 17mm
• Tubeless Ready: Yes
• Recommended rim tape: 18mm tune rim tape, Tubeless compatible
• Recommended valve height: 60mm tune tubeless valve or comparable valve
• Tire and max. pressure: 23mm/8,5bar 25mm/8bar - 28mm/7,5bar - 33mm/5bar
• Nipples: SAPIM anodized, double square, Polyax, Secure Lock, 16mm
• Recommended brake pads: Centerlock* disc brake mount
• Colors: for hubs, nipples and tune decals, available in all tune anodized colors

Notes: Screw on the Centerlock* lockring and tighten it with max. 40Nm.
Further information can be found in the instructions.
*Centerlock disc brake mount licensed from Shimano

---

---