tune MAG 170 road moyeux rear 130mm

Montrer tous les produits tune
  • MAG 170 - The new entry into the TUNE world.

    The Mag 170 is the entrance into the Tune-World. It presses with measly 178 g onto the scales and inside are spinning the best bearings
    as known and they are rode also by pros. Naturally the MAG 170 is milled and lasered in Buggingen, therefore you
    enjoy the full spare part service as well as a free choice in colour, number of holes, width and standard of free-wheeling mechanism.
    Each version is available at our shop!

    Out of the revised classic MAG 180 the new 17mm axle MAG 170 has been developed!
    The successor convinces with stability and additional reduced weight at a fair price.
    The MAG 170 opens up definitely the hardcore area within the rim brake hubs.

    Unique construction: no bearing misalignments even under highest clamping force thanks to adjustable bearing play.
    The bigger flange (High/Low-flange) on the free wheel side enables a more sloping position of the spokes and therefore a more symmetric wheel.

    The MAG 170 is 4 fold beared, ,8 fold sealed. Free wheel profil for Campagnolo, SRAM or Shimano is option.
    Despite of the sensational low weight no limit of application! Tune uses special bearings
    which are not available on the market! The bearings identify themselves through special grease as well as the filling degree.
    Besides they are double abradant and maintenance-free.

    Available in all Tune anodized colors!

    Due to local production, spare parts service up to the smallest spring is guaranteed.

    Specs MAG 170

    • Weight: 178g
    • Material: alu, steel, titan
    • Width of axis: 130mm (RB)
    • Diameter of axis: 17mm
    • Number of holes: 16, 18, 20, 24, 28, 32, 36 H.
    • Bearing: 4 groove ball bearing
    • Sealing: double contact seals
    • Clamping method: QR-skewer
    • Pitch circle Ø: (l/r) 40,9mm/55,5 mm
    • Flange to center: (l/r) 35,5mm/17mm (130 mm)
    • Free wheel: 11-speed Shimano/SRAM, Campagnolo
  • Rate this product

    •  
    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!


  • Annotations


    Si l'option spécifique que vous recherchez (par ex. CL/6-trou, corps de moyeu libre, axe standard ou couleur d'anodisation) ne figure pas dans la liste, nous vous prions de passer la commande en utilisant un moyeu factice et de laisser un bref commentaire concernant la configuration dont vous avez exactement besoin.

    Si vous avez des questions ou des changements de prix, nous vous contacterons immédiatement après avoir passé votre commande.
  • Attachements
    ManualMode d'emploi
    2.05 MB
  • Les clients qui ont regardé ce produit ont aussi regardé ceci:
Livraison gratuits à partir de 300€
Réponse aux emails en français
Vous êtes ici:
Ce produit est manufacturé à la main en Allemagne