tune MAG 150 road moyeux rear 130mm

Montrer tous les produits tune
  • MAG 150 - 164 gram
    Unlimited use with minimum weight

    Optional Ceramicspeed Upgrade, click here

    How do you make light stuff become even lighter? We drilled our free-wheeling mechanism at unloaded points and reduced and wrapped the left flange of the Mag 150 with carbon. Hand made in the Black Forest.
    The result: We saved 14 gram compared to the Mag 170.

    The MAG150 allows unrestricted application at lowest weight. A perfect symbiosis of aluminium and carbon. The complex manual lamination of the carbon flange does not economise only the weight but also does increase the tenacity of the flange. The 2011 version convinced with stability. Its new 17mm axle and the closer flanges do increase again the stiffness!

    Unique construction: through adjustable play no bearing deadlock even at hardest lacing. The bigger flange (high/low flange) on the freewheel side allows sloped spokes and therefore a symmetric wheel.

    The MAG 150 is 4 fold beared, 8 fold sealed. Free choice of freewheel profile for Campagnolo, SRAM or Shiman! Despite of the sensational low weight of only 164g there is no restriction of application.

    Tune uses special bearings which are not available on the market! The bearings identify themselves through special grease as well as a higher filling degree. Furthermore they are double abradant sealed and maintenance free!

    Available in all TUNE-anodized colors!

    Specs MAG150
    • Weight: 164g
    • Material: carbon, titan, aluminum
    • Width of axle: 130 mm
    • Diameter of axle: 17 mm
    • Number of spokes: 16, 18, 20, 24, 28, 32,
    • Bearing: 4 groove-ball bearing
    • Pawls: Titan TiAI6V4
    • Teeth: Titan TiAI6V4
    • QR-skewer: Jamfree, independent from tightness
    • Pitch circle Ø: (l/r)23,4mm / 55,5mm
    • Flange to center: (l/r)34,6mm / 17mm
    • Free hub: 10/11-speed Shimano/SRAM, Campagnolo

  • Rate this product

    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!

  • Annotations

    Si l'option spécifique que vous recherchez (par ex. CL/6-trou, corps de moyeu libre, axe standard ou couleur d'anodisation) ne figure pas dans la liste, nous vous prions de passer la commande en utilisant un moyeu factice et de laisser un bref commentaire concernant la configuration dont vous avez exactement besoin.

    Si vous avez des questions ou des changements de prix, nous vous contacterons immédiatement après avoir passé votre commande.
  • Attachements
    MIG150 User ManualMode d'emploi
    2.23 MB
  • Les clients qui ont regardé ce produit ont aussi regardé ceci:
Livraison gratuits à partir de 300€
Réponse aux emails en français
Vous êtes ici:
Ce produit est manufacturé à la main en Allemagne