Contactez-nous

tune KINGkong Boost disc moyeux front

Ajouter au panier

Vu ailleurs moins cher ?

Ce produit est manufacturé à la main en Allemagne
  • KINGkong BOOST - 121 gram
    Front hub with 110mm mounting width


    Optional Ceramicspeed Upgrade, click here

    The King Boost front hub with 110mm hub spacing and Kong Boost rear hub with 148mm hub spacing differs in some fundamental points from the hubs with 100mm and 135/ 142mm hub spacing. When X-12 rear stays were introduced only the hub spacing was increased, the geometry of the hub (flange distance and bearing support points) stayed uninfluenced. The Boost standard allows a complete adaptation of the hubs with wider hub body’s and axles. A conversion of current hubs to the Boost standard is therefore not possible. However, the new standard offers some advantages:
    The flange distance increases for both hubs. Thereby stiffer wheelsets can be build, especially noticeable for 29er. One point of critics for bigger wheels was the poor stiffens. By the bigger hub spacing of the Boost standard it is possible to realise 29er wheels that are on a level field with wheels!
    The bearing support points can be wider and therefore be constructed stiffer and more stable.
    Certainly the topic weight plays a big role in our development, here the King Boost & Kong Boost only bring 121g & 214g on to the scale!

    Tune uses special bearings which are like that not available on the market! The bearings identify themselves through a special grease and a higher filling degree. Besides o fit they are double abradant sealed and maintenancfree.

    The disc hub are for 6 holes/IS2000, not Centerlock.

    Specs KINGkong BOOST
    • Body: aluminium 7075
    • Manufacturing method: CNC-machined, one piece body, anodized
    • Holes: 28 / 32
    • Hub spacing: 110 mm
    • Bearings: 2 deep-groove ball bearings
    • Sealing: double contact seals
    • Clamping method: 15 mm Thru-axle
    • Hole Ø: (l/r) 55,5mm
    • Flange distance: (l/r) 27,4/37,0 mm




    Annotations


    Si l'option spécifique que vous recherchez (par ex. CL/6-trou, corps de moyeu libre, axe standard ou couleur d'anodisation) ne figure pas dans la liste, nous vous prions de passer la commande en utilisant un moyeu factice et de laisser un bref commentaire concernant la configuration dont vous avez exactement besoin.

    Si vous avez des questions ou des changements de prix, nous vous contacterons immédiatement après avoir passé votre commande.
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
  • Montrer tous les produits tune
délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

EN STOCK

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines

délai de livraison: 1 - 2 semaines