Contactez-nous

tune BlackBurner 28 Endurance 29er front wheel Princess 28H

Ajouter au panier

Vu ailleurs moins cher ?

Ce produit est manufacturé à la main en Allemagne
  • Product information "Blackburner 28 Endurance 29" front wheel"
    Our BlackBurner28 Endurance offers a modern extra-wide carbon rim to make your XC-racebike ride like on rails! The combination will ultralight hubs will ease your accelerations too!


    The different components of the BlackBurner28 Endurance 29" haven been designed and chosen to obtain the a superlight carbon wheelset with wide rims to match any lightweight racebike. Concerning the lateral stiffness, the 32 SAPIM CX-Super aero-spokes spokes on the front wheel and on the rear wheel, our posh Prince/Princess hubs coupled with the carbon rim with 28mm inner width make the wheelset super stiff and superlight. The rims with beautiful UD finish show the craftmanship required during production. As the BlackBurner28 Endurance 29" are available in all Tunes colours, take the chance to personalize your ride.

    Technical data front wheel
    • Weight: from 625g
    • Hub Type: Princess 32 holes with Endurance bearings
    • Spokes: SAPIM CX-Super Black Aero
    • Max. Spoke Tension: 1100N
    • Max. rider weight: 90kg
    • Max. system weight: 105kg
    • Rim Inner Width: 28,00mm
    • Rim Outer Width: 33,50mm
    • Rim Height: 22,00mm
    • Rim standard: 29", 622x28mm
    • Tubeless Ready: Yes
    • Recommended Width Tubeless Tape: 30mm
    • Recommended Length Tubeless Valve: 44mm
    • Tyres and max. pressure: 2,2"/2,75bar 2,25"/2,7bar - 2,35"/2,5bar
    • ERD (measured for Tune Spoke Simulator): 595mm
    • Axle type: available in 5x100mm, 12x100mm, 15x100mm, 15x110mm or 15x110mm TorqueCaps
    • Nipples: SAPIM Anodized, Polyax, 12mm
    • Brake Interface: 6-Bolt or Centerlock* disc-brake interface
    • Notes: for Tubeless Tires only (with or without inner tube)
    • Colours: for hubs, nipples and Tune decals, available in all Tune anodised colours


    *Center Lock rotor mounting system licensed by Shimano




    Annotations


    Si l'option spécifique que vous recherchez (par exemple CL/6-trous, corps de moyeu libre ou essieu standard) ne figure pas dans la liste, nous vous prions de passer votre commande à l'aide d'une paire de roues factices et d'ajouter un bref commentaire concernant la configuration dont vous avez besoin exactement.

    La couleur se réfère à la couleur d'anodisation des moyeux.
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
  • Montrer tous les produits tune
délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines

délai de livraison: 5 - 8 semaines