Contactez-nous

Pitlock Sicherung M10 single

Ajouter au panier

Vu ailleurs moins cher ?

    • Function:
    • Security lock for solid axle hubs and track hubs with M10 x 1 thread, like:
    • Rohloff TS Speedhubs
    • SRAM Automatix
    • NuVinci / Enviolo n330, n360 or n380
    • Miche Primato rear hub
    • Lock for one side!
    • content:
    • 1 closure M10, 1 Pit key for solid axles, 1 code card



    • Important:
    • The protruding thread is supposed to stick out of the dropout for approximately 14 mm. The locking ring requires a space (supporting surface) of 15 mm in the radius or rather 30 mm in the diameter around the thread, so that the Pitlock lock can be installed safely. In case the protruding thread is too short, it is necessary to use an axle stub with a long threaded axle (available from Rohloff, article no.: 8235L Axle Plate TS OEM).
    • attention:
    • Unfortunately, the system for solid axles (SH38, SH90 and M10) can not be produced with the same coding as the M5 system.
    • The coded nut of solid axles is much bigger than the coded nut for M5 axles.
    • As a result, the PIT key of the solid axle systems must of course be bigger.
    • Our solid axle systems are combinable!
    • So, if you have a Shimano solid axle dynamo hub on your front wheel and a Rohloff solid axle or a Shimano Alfine/ Nexus on your rear wheel, it is possible to secure these two hubs with the same coding.
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
  • Montrer tous les produits Pitlock
disponible en 1-3 jours de semaine

disponible en 1-3 jours de semaine