LOOK Kéo Blade carbon pedals noir

Montrer tous les produits LOOK
    Vous pourrez trouver de plus amples informations sur ce qui est exactement inclus dans la livraison dans la partie gauche du menu.
  • KÉO BLADE CARBON

    KÉO BLADE CARBON - POWER TRANSFER AND AERODYNAMICS

    Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.

    Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.

    The KEO BLADE CARBON has the best weight / power ratio in its class.

    Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.




    Technologies

    OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY

    The spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that pass through internal roller and needle bearings located directly under the pedal platform. This new construction allows a gain of approximately 2 to watts at 100 rpm.

    The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.

    Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.

    LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

    ULTRA-POWERFUL PLATFORM

    To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.

    The platform of the CARBON BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.

    With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.

    Its weight / power ratio positions it well above the competition

    BODY AND BLADE CARBON TECHNOLOGY

    Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.

    BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT

    Specifications

    • BODY: Carbon
    • SPINDLE: Chromoly + / Steel
    • THREADING: 9/16 X 20 mm
    • BEARINGS: 1 roller bearing, 1 needle bearing
    • STACK HEIGHT: 14.8 mm
    • DISTANCE PEDAL SPINDLE / CRANKARM: 53 mm
    • PLATFORM WIDTH: 67 mm
    • PLATFORM SURFACE AREA: 700 mm²
    • TENSION: Pedals come installed with “12” carbon blades + additional “16” carbon blades
    • (“20” carbon blades sold separately)
    • CLEATS: Kéo Cleats-Gray
    • FLOAT: 0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)
    • PEDAL WEIGHT: 110 gr (288 gr per pair with cleats and screws)
    • COLORS: Black
    • ACCESSORIES: 2 sets of blades +1 pair of Kéo Cleats-Gray + screws
    • WARRANTY: 2 years


    LOOK Warranty policy

    Compatible Kéo cleats!
  • Rate this product

    •  
    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!
  • Tipp
    All clip-on pedals come including cleats.
  • Attachements
    Keo Blade TechnologyMode d'emploi
    1.77 MB
  • EAN/UPC
    Année2018
    EAN:3611720129529
  • Les clients qui ont regardé ce produit ont aussi regardé ceci:
Livraison gratuits à partir de 300€
Réponse aux emails en français
Vous êtes ici: