CeramicSpeed road/MTB SRAM 11-speed 1X derailleur pulley for Force 1/Rival 1/Apex 1 Titanium 12T. ceramic bottom bracket 626 coated natur

Montrer tous les produits CeramicSpeed
    Vous pourrez trouver de plus amples informations sur ce qui est exactement inclus dans la livraison dans la partie gauche du menu.
  • Titanium Pulley Wheels for SRAM 1-11

    SRAM’s 1x 11-speed rear derailleurs work better with our 12-tooth pulleys. They work with less mechanical friction, adding to the power transmitted to the rear wheel. They also possess greater durability, going longer between replacement intervals.

    Our Pulley Wheels for SRAM 1-11 are compatible with the following 11-speed rear derailleurs:
    • Force CX1
    • Force 1
    • Rival 1
    • Apex 1
    • XX1 MTB
    • X01 MTB


    The upper and lower pulleys both have a narrow-wide tooth design.

    The machined titanium pulleys comes with CeramicSpeed Balls installed in coated, hardened-steel races that adds an extra layer to the performance of the product and and offer even longer lifetime and lower friction.



    In the box
    • 2 x 12-tooth pulley wheels
    • CeramicSpeed Bearing Oil in 15ml dropper bottle
    • CeramicSpeed Grease in 5ml syringe
    • Sticker sheet


    Machined aluminum pulleys are the standard by which we measure. Machined titanium lasts three times longer.

    The Coated Bearings have races 75% harder than our Standard Bearings. They have a life 60% longer than our Standard. Frictional drag decreases by over 50% compared to our Standard.
    Learn more about the advantage of our coated bearings here.

    There are different upper and lower pulleys, are marked, and have directional arrows.

    These pulleys need to be installed with stock SRAM pulley spacers between the cages. Save those before installing CeramicSpeed.


    The Coated Advantage

    6-Year Warranty Program

    CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our proprietary coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of theCeramicSpeed Balls results in virtually no wear on the bearing.

    Within our comprehensive R&D program, the special coating has been developed in cooperation with a European coating specialist. Applied to the bearing’s steel races, through an advanced process that ensures an even, smooth and homogeneous surface, the coating formula improves even further the high quality of CeramicSpeed Bearings.

    Thanks to the coating’s high resistance to corrosion – even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible. We recommend choosing CeramicSpeed Coated Bearings for unmatched longevity and incredibly low friction.

    Like all CeramicSpeed Bearings, our coated products are handbuilt in Denmark. Building a coated bearing adds a number of extra steps to the process. The CeramicSpeed balls and steel races are matched to the micron after which, each set of races is coated. The races are kept together in pairs through the entire process and after coating, each set needs to pass the quality control before they go into production.



    The kits come with CeramicSpeed oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come oiled. The additional oil is for maintenance. The grease for harsh environments.
  • Rate this product

    •  
    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!
  • EAN/UPC
    Numéro de série:CS-379
    EAN:5711050002269
  • Les clients qui ont regardé ce produit ont aussi regardé ceci:
Livraison gratuits à partir de 300€
Réponse aux emails en français
Vous êtes ici: