OSPW for Shimano Dura Ace 9200 and Ultegra 8100 Series
The Oversized Pulley Wheel System for Shimano Dura Ace 9200 and Ultegra 8100 with integrated stop tower for simple installation and durability.
The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world.
CeramicSpeed OSPW Systems are an industry leading product, chosen by World Champions and top athletes around the world.
This OSPW System has handbuilt CeramicSpeed Bearings installed in each pulley and comes with a 4 year warranty as standard and a lifetime warranty when choosing coated or SLT bearings.
Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings.
Please note while there are visual similarities in the 9100 Series OSPW and 9200 Series OSPW, the spring tension settings, rotation stop tower placement, and mounting pin depth are slightly repositioned and as such the systems are not cross compatible.
For 8100 derailleurs, the cage uses the factory derailleur body washer. 9200 derailleurs will require the new included derailleur body washer.
The overall power savings of the OSPW System for Shimano Dura Ace 9200 and Ultegra 8100 reach 30%-60%, or more in some cases, over a stock setup.
The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market. Installation of OSPW for Shimano 9250
Installation of OSPW for Shimano 8150
The Coated Advantage Lifetime Warranty Program
CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. Our unique coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of theCeramicSpeed Balls results in virtually no wear on the bearing.
The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
Within our comprehensive R&D program, the special coating has been developed in cooperation with a European coating specialist. Applied to the bearing’s steel races, through an advanced process that ensures an even, smooth and homogeneous surface, the coating formula improves even further the high quality of CeramicSpeed Bearings.
Thanks to the coating’s high resistance to corrosion – even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible. We recommend choosing CeramicSpeed Coated Bearings for unmatched longevity and incredibly low friction.