CarbonTi X-Hub SL disc 6-Loch moyeux rear QR 32H XD noir

X-Hub SL Disc Rear - 192g

X-Hub SL Disc Rear is a very light and sophisticated product and it is intended for Cross Country or Marathon use. Warranty voids when used on an electric-assisted bicycle (E-bike). X-Hub SL Disc Rear is compatible with the classic standard quick release, however it is a possible the conversion to the X-12 standard replacing only the axle (cod. XHMSLRAXN) and its end axle (cod. XHMSLRCLN). The fixing system of the disc rotor is six holes International Standard. X-Hub SL Disc Rear
presents refinements and a mechanical stiffness/weight ratio at the highest level, the Al7075-T6 body is machined from solid and is lightened by meticolous works with CNC machines. The Al7075-T6 17mm diameter axle has a variable thickness, two high quality sealed bearings with external preload system provide reliability and smoothness. The freewheel mechanism is protected by a lip seal and itis provided by a titanium toothed ring to 56 teeth with four points of engagement.

Product Specification

• Spoke hole drilling: 24/28/32
• Spoke hole: Ø 2.5 mm
• Flange diameter: Ø 54.50 mm
• Axle diameter: 17 mm
• Axle width: 135 mm
• Frame attachment: quick release
• X-12 Conversion kit: available
• Disk attachment:
• International Standard (6 holes)
• Recommended hub spoke tension: 120 KgF (Max 130 Kgf)
• Recommended tightening rotor bolt tension: 4 Nm w/med. threadlocker (Max 6 Nm)