Selection Disc 38T
The wheelsets of our SELECTION
line represent the entry into the ax-lightness wheelset family.
Nonetheless it is not being cut back on the quality or qualities of the wheels. The Selection wheels share our same high-end German-made rims that shine with their unparalleled lightness and high stability.
wheelsets are a synonym for an uncompromising reliability even under severe conditions, without sacrificing the special ax qualities such as light weight, high stiffness or low moment of inertia.
On the hub side for MY2018 we are resorting to our own disc hubs that manage to score with their low weights of just 150 respectively 287 g but especially with their high versatility thanks to adapters for various axle standards.
Thanks to their refined geometry and multi-sealed ball bearings the hubs boost a high stability and suitability for daily use and therewith form an optimal complement to our SELECTION
Specifications - Selection Disc 38T
Laminated spoke holes
|Weight (+/- 5 %)||1230 g/set|
|Rims||ax 38T, 285 g/piece|
|Rim material||Full Carbon|
|Brake type||Disc brake - 6-Bolt|
|Rim depth||38 mm|
|Rim width||26 mm|
|Axle standards front||QR, 12mm thru-axle, 15mm thru-axle|
|Axle standards rear||QR, 142x12 thru-axle|
|Spokes||DT Swiss Aerolite, black|
|Nipples||DT Swiss Pro Lock hidden, internal|
|Spoke tension||140 kgf|
|Spoke count (f/r)||24 / 24|
|Intended use||Road, Cyclocross|
|Rider weight limit||100 kg|
Instead of simply drilling the spoke holes of our rims, we take a different approach with our rims: Every single spoke hole is crafted by hand and reinforced with strategically placed reinforcement patches.
The advantage is obvious: Where carbon is being drilled, one inevitably also cuts through fibres. A continuous fibre flow however is essential for the material to play its advantages such as the high tensile strength, even more indispensable for nipple holes that are exposed to high spoke tensions. Specifically crafted nipple seats allow an optimal orientation of the nipples and at the same time distribute the occurring forces evenly into the rim bed.
Independent testing at an university lab has confirmed the performance of this time and labour intensive approach: The rim is capable of withstanding nipple pulling forces of over 5000 N - circa twice as much as the best competitor and more than every hub flange or spoke would be able to endure. As a result our rims do not carry any spoke tension limit!
Us ourselves we are building our wheels with up to 140 kg of a spoke tension: A guarantor for you to have long-lasting joy with your wheels. The higher the spoke tension, the lesser the opportunity for a spoke to be unloaded upon an overload of the wheels (e.g. from a compression such as an obstacle, pothole or anything alike) and the wheels to therewith come out of true. That way you are longer able to ride with your perfectly trued wheels. As an additional advantage there also is minor increase in stiffness to be recorded.
An effort that pays off!
All of our wheelsets are individually built by hand in our manufacture in Creußen, Bayern, to the tightest tolerances and with extremely high spoke tension. We refrain from the use of wheel building machines and invariably trust on the craftsmanship of specially qualified mechanics. The high experience with high-end-material allows a consistently high quality, the tight tolerance in lateral runout and radial runout a perfect runout and therewith a lot of joy with the wheels.