Contact us

Zipp 808 NSW disc Centerlock tubeless wheel rear SRAM


Seen this cheaper?

This item is crafted in the U.S.
  • 808 NSW Carbon Tubeless Disc-brake

    Zipp’s 808 NSW Tubeless Disc-brake wheelset features a rim shape that aerodynamically integrates wider tubeless tires for high-performance road cycling at our deepest rim depth, 82mm. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. Also, you get the wider tire options and increased stopping power of disc brakes. The 808 NSW Tubeless Disc brake wheelset is optimized for smoother pavement and are aerodynamically optimized for 25mm tires. By extending our patented ABLC Sawtooth dimples all the way to the rim’s edge on each of the wheels, NSW disc brake rims deliver higher frequency wind vortex shedding for best-in-class crosswind stability. This wheelset allows you to run tubeless or traditional clinchers. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style.

    • New Zipp graphics and cosmetics that scream speed, applied using Zipp’s ImPress direct-print technology to help allow the dimples to do what they were designed to do – improve aero performance
    • An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering, control, and comfort
    • Cognition DB hubset with Axial Clutch technology provides reduced drag when coasting
    • ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel
    • Center locking rotor interface. Lockring is included
    • XDR or SRAM/Shimano driver bodies
    • Ships with 12mm front and rear end caps
    • Campagnolo driver body sold separately


    Technologies

    ABLC SawTooth
    Zipp’s Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim’s profile to further reduce high yaw drag and improve crosswind stability.

    Cognition Hubset
    With the Cognition hubset’s Axial Clutch technology, we’ve reduced this drag by disengaging the ratchet mechanism when coasting. So you can approach corners at higher speeds, and ultimately, save time. A star-flanged straight-pull hubshell design on the rear hub distributes the load placed on the hub flange away from the bearings. We’ve also developed a unique scalloped edge hubshell design for our front hub. This scalloped design maintains the bearing bore diameter when high radial spoke tension is applied. That means you get bearings that quietly stay in place, roll faster, last longer, and provide a laterally stiffer hub.

    ImPress
    We’ve employed Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do – help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. ImPress graphics also give 808 NSW a distinctive stealthy look.

    Axial Clutch
    With Cognition’s Axial Clutch technology, we’ve reduced this drag by disengaging the ratchet mechanism when coasting. With less internal hub drag a rider can pedal less when drafting in a headwind, achieve higher speeds when coasting in an aero tuck, or opt to stop pedaling a moment sooner before entering a corner and bank that wattage for use exiting the corner. Axial Clutch technology also allows riders to maintain speed through corners that don’t require braking input, thereby increasing corner exit speeds.

    Inside the Axial Clutch mechanism we use magnets, rather than steel springs, to move and engage our light weight Metal Injection Molded (MIM) ratchet rings for unmatched reliability and consistent operation. With 36 points of engagement that all interlock simultaneously, there isn’t a more secure freehub mechanism on the market.

    Specifications
    • Size: 700c
    • Rim construction: Carbon with Hooks
    • Tire compatibility: Clincher or Tubeless tires
    • Brake compatibility: Disc (Center Lock)
    • Driver body type: SRAM XDR, SRAM/Shimano Road
    • Rim inside width: 19mm
    • Rim finish: UD fiber, Impress technology
    • Rim profile: Symmetrical
    • Weight: 1870g (weight based on: wheel set in lightest configuration, 12mm through axles and XDR body. No tape or valve included. Front: 887g Rear: 983g)
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
    • 1x Zipp 808 NSW disc Centerlock tubeless wheel
  • Show all items from Zipp
ready for sending in 1-3 business days

ready for sending in 1-3 business days