Contact us

Zipp 202 NSW disc Centerlock tubeless wheel


Seen this cheaper?

This item is crafted in the U.S.
  • 202 NSW Carbon Tubeless Disc-brake

    Zipp’s 202 NSW Tubeless Disc-brake wheelset packs a heavy load of performance into a light and nimble wheelset. This wheel flies up the toughest climbs, shaves time off descents, and handles deftly off pavement. For aero performance, Zipp’s ABLC Sawtooth dimple design extends to the rim’s edge. The 202 NSW Tubeless Disc-brake is optimized for wide tires with lower tire pressure to meet the performance needs of modern riders in search of low rolling resistance and high compliance. With an internal width of 21mm, the wheelset is well suited for rough roads and tests fastest with a 28mm tire in the majority of wind angles.

    • New Zipp graphics and cosmetic identity that scream speed. Applied using Zipp’s ImPress direct-print technology
    • Center locking rotor interface. Lockring is included
    • XDR or SRAM/Shimano driver bodies
    • Ships with 12mm front and rear end caps
    • Campagnolo driver body sold separately
    • Tubeless design provides secure performance when ridden at lower tire pressures
    • Cognition DB hub features Axial Clutch technology to allow the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs


    Technologies

    ABLC SawTooth
    Zipp’s Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim’s profile to further reduce high yaw drag and improve crosswind stability.

    Cognition Hubset
    With the Cognition hubset’s Axial Clutch technology, we’ve reduced this drag by disengaging the ratchet mechanism when coasting. So you can approach corners at higher speeds, and ultimately, save time. A star-flanged straight-pull hubshell design on the rear hub distributes the load placed on the hub flange away from the bearings. We’ve also developed a unique scalloped edge hubshell design for our front hub. This scalloped design maintains the bearing bore diameter when high radial spoke tension is applied. That means you get bearings that quietly stay in place, roll faster, last longer, and provide a laterally stiffer hub.

    ImPress
    We’ve employed Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do – help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. ImPress graphics also give 808 NSW a distinctive stealthy look.

    Axial Clutch
    With Cognition’s Axial Clutch technology, we’ve reduced this drag by disengaging the ratchet mechanism when coasting. With less internal hub drag a rider can pedal less when drafting in a headwind, achieve higher speeds when coasting in an aero tuck, or opt to stop pedaling a moment sooner before entering a corner and bank that wattage for use exiting the corner. Axial Clutch technology also allows riders to maintain speed through corners that don’t require braking input, thereby increasing corner exit speeds.

    Inside the Axial Clutch mechanism we use magnets, rather than steel springs, to move and engage our light weight Metal Injection Molded (MIM) ratchet rings for unmatched reliability and consistent operation. With 36 points of engagement that all interlock simultaneously, there isn’t a more secure freehub mechanism on the market.

    Specifications
    • Size (wheels): 700c
    • Rim construction: Carbon w/Hooks
    • Tire compatibility: Clincher or Tubeless tires
    • Brake compatibility: Disc (Center Lock)
    • Driver body type: SRAM XDR, SRAM/Shimano Road
    • Rim inside width: 21mm
    • Rim finish: UD fiber, Impress technology
    • Rim profile: Symmetrical
    • Weight: 1506g (Weight Based On Lightest configuration: 12mm through axles and XDR body. No tape or valve included in weight. Front: 705g Rear: 801g)
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
    • 1x Zipp 202 NSW disc Centerlock tubeless wheel
    • Without Quick Release / Thru-Axle
  • Show all items from Zipp
ready for sending in 1-3 business days

ready for sending in 1-3 business days

ready for sending in 1-3 business days