Xentis SQUAD 5.8 RACE Carbon Technology from the Austrian high end manufacturer
There is a material that performs better compared to others. Carbon composite is a high-end performance material. XeNTiS uses it to produce carbon wheels, rims and components unlike any other.
XeNTiS claims to set new standards. Many years of expertise in dealing with carbon flows into the largely hand crafted production lines.
Essential are also the experiences of successful athletes as they are the drive behind the permanent development of XeNTiS wheels and components.
The Squad SL is the result of a close cooperation with the leading Continental-Racing Team Felbermayr-Simplon Wels from Austria.
The implementation takes place by means of CAD and FE calculation systems, then prototypes are constructed and further analyzed. Only if the relevant results meet or exceed expectations, the data will be transmitted to the computerized aerodynamic test bench and finally the result are directly compared to the result of the prototype in the wind tunnel.
|XeNTis wheels are 100% hand made in Austria. All wheels are fitted with a unique RFID chip that allow exact information to be traced and extracted such as origin and manufacturing specifications.|
|XeNTiS improves aerodynamics using the ACTIVE TURBULATOR (Wave)|
The XeNTiS development is not limited to the production of high quality carbon rims, but also extends to the development and manufacture of in-house hubs. The product range is extended by the cooperation with DT Swiss. Long-term tests, bench testing and ultimately racing commitments contribute to the excellent results.
|Due to the XeNTiS offset holes inside the rim, the durability of XeNTiS wheels is very high. These holes guarantee an optimal and durable power transfer and this process prevents penetration of water into the rim.|
|Due to the TUBELESS READY system all XeNTiS clincher wheels are ridable without an inner tube. Because of the special rim base the tyre fits exactly to the rim flange. This application guarantees a significant increase in puncture protection and riding comfort.|
|The ASYMMETRIC RIM PROFILE is used in combination with rear and disc-brake hubs. As a result, the spoke tension left and right is almost equal and therefore the lateral stiffness of the entire wheel increases.|
| ||XeNTiS wheels are harmonically balanced and feature an integrated tachometer magnet. (No tachometer magnet in RACE 2.5 and SL 2.5)|
Xentis wheelsets are orderable as single wheels here in our shop, just contact our support team for further information!
- Carbon fiber: 3K-Carbon
- Dimension: 622 x 18C tubeless ready
- Tyres: clincher 22-25mm
- Tyre inflation pressure: 9,0 bar (22-622)/130 psi in 22-622, 9,0 bar (23-622)/130 psi in 23-622, 7,5 bar (25-622)/116 psi in 25-622
- Brake surface: none
- Rim depth: 58mm
- Rim width: 26mm
- Spokes count: 28/28 (1:1)
- Hub front / rear: DT SWISS 350, SP, Center Lock
- Weight per set: WHITE: 1766g / BLACK: 1766g
- Max. combined weight: 110kg
XeNTiS has taken up the challenge to set new benchmarks in wheel construction. During the predominantly manual production process, XeNTiS has gathered extensive know-how using carbon composite materials. The cooperation between the XeNTiS R&D team and experienced athletes has played a vital part in the continuing development of next generation wheels.