Carbon Technology from the Austrian high end manufacturer
The SQUAD 5.8 RACE Clincher is an aerodynamic optimized wheel with minimal drag for newbies and experienced athletes.
XeNTiS hubs The XeNTiS development is not limited to the production of high quality carbon rims, but also extends to the development and manufacture of in-house hubs. The product range is extended by the cooperation with DT Swiss. Long-term tests, bench testing and ultimately racing commitments contribute to the excellent results.
RFID XeNTis wheels are 100% hand made in Austria. All wheels are fitted with a unique RFID chip that allow exact information to be traced and extracted such as origin and manufacturing specifications.
UV-resistant Due to a clear coated surface finish all XeNTiS wheels are UV protected.
Tachometer magnet XeNTiS wheels are harmonically balanced and feature an integrated tachometer magnet (No tachometer magnet in RACE 2.5 and SL 2.5)
model: SQUAD 5.8 RACE tubeless ready
design: MATT BLACK
carbon fiber: 3K-Carbon
dimension rim: 622x18C tubeless ready
tyres: clincher 22-26mm
tyre inflation pressure: 9,0 bar (22-622) /130 psi in (22-622) 8,8 bar (23-622) /127 psi in (23-622) 7,5 bar (25-622) /108 psi in (25-622) 7,0 bar (26-622) /101 psi in (26-622)
brake surface: XBP CARBON (patentiert / patented)
brake pads: XeNTiS X13 Racing Shimano R55-C3 SRAM Standard BBB
Tubeless Ready System Due to the TUBELESS READY system all XeNTiS clincher wheels are ridable without an inner tube. Because of the special rim base the tyre fits exactly to the rim flange. This application guarantees a significant increase in puncture protection and riding comfort.
Asymmetrical rim cross-sections The ASYMMETRIC RIM PROFILE is used in combination with rear and disc-brake hubs As a result, the spoke tension left and right is almost equal and therefore the lateral stiffness of the entire wheel increases.
XeNTiS products may not be exactly as shown, specifications subject to change without notice. Weight tolerances (+/- 5%) may occur due to the manufacturing process. Errors and ommisions excepted!
XeNTiS has taken up the challenge to set new benchmarks in wheel construction. During the predominantly manual production process, XeNTiS has gathered extensive know-how using carbon composite materials. The cooperation between the XeNTiS R&D team and experienced athletes has played a vital part in the continuing development of next generation wheels.