Carbon Technology from the Austrian high end manufacturer
The Squad 2.5 MTB 29 is the ultra-lightweight wheelset of the XeNTiS mountain bike wheels and is designed for a frame size of 29 inches. The tubeless-ready system makes it possible to ride at even lower pressures and thus adapt the wheel perfectly to the terrain.
The elegant 3K surface finish is the absolute eye-catcher in off-road environment and makes the heart of every carbon enthusiast beat faster. The XeNTiS XH002 hubs with 6-hole brake disc mounts provide the necessary reliability in terms of mileage. In addition to the standard installation width, these are also available as BOOST versions.
XeNTiS hubs The XeNTiS development is not limited to the production of high quality carbon rims, but also extends to the development and manufacture of in-house hubs. The product range is extended by the cooperation with DT Swiss. Long-term tests, bench testing and ultimately racing commitments contribute to the excellent results.
RFID XeNTis wheels are 100% hand made in Austria. All wheels are fitted with a unique RFID chip that allow exact information to be traced and extracted such as origin and manufacturing specifications.
UV-resistant Due to a clear coated surface finish all XeNTiS wheels are UV protected.
model: SQUAD 2.5 MTB 29
design: MATT BLACK
carbon fiber: 3K-Carbon
dimension rim: 622x25C tubeless ready
tyres: clincher tyres 47-622 to 60-622
tyre inflation pressure: 3,5 bar (29x1,75 Zoll) /50 psi in (47-622) 3,0 bar (29x2,10 Zoll) /43 psi in (54-622) 2,7 bar (29x2,25 Zoll) /37 psi in (57-622) 2,4 bar (29x2,35 Zoll) /34 psi in (60-622)
Tubeless Ready System Due to the TUBELESS READY system all XeNTiS clincher wheels are ridable without an inner tube. Because of the special rim base the tyre fits exactly to the rim flange. This application guarantees a significant increase in puncture protection and riding comfort.
Special bores Based on the XeNTiS offset holes inside the rim, the durability of XeNTiS wheels is very high. These holes guarantee an optimal and durable power transfer and this process prevents penetration of water into the rim.
XeNTiS products may not be exactly as shown, specifications subject to change without notice. Weight tolerances (+/- 5%) may occur due to the manufacturing process. Errors and ommisions excepted!
XeNTiS has taken up the challenge to set new benchmarks in wheel construction. During the predominantly manual production process, XeNTiS has gathered extensive know-how using carbon composite materials. The cooperation between the XeNTiS R&D team and experienced athletes has played a vital part in the continuing development of next generation wheels.