Contact us

Wolf Tooth SRAM Directmount chainring Boost 52mm 3mm black

Add to basket

Seen this cheaper?

  • The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in 3 different offsets: standard 6mm offset, Boost 3mm offset, and BB30 short spindle 0mm offset.

    • Compatibility:
    • These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
    • Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    • There are 3 offsets:
    • Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline
    • Standard MTB: 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30 cranks for 49mm chainline
    • Boost: 3mm offset for 52mm chainline
    • BB30: 0mm offset for BB30 short spindle cranks for 49mm chainline
    • Fat bikes: If your fat bike has a 170/177 rear hub spacing, use the standard 6mm offset
    • Praxis Works Road/CX cranks use the 6mm offset. Praxis Works mountain cranks use the 3mm offset for their DM-A and 0mm offset for their DM-B chainrings.
    • Weights: 28t / 59g | 30t / 65g | 32t / 70g | 34t / 75g | 36t / 81g
    • Material: 7075-T6 aluminum
    • Made in the USA
  • Rate this product

    Rate this product

    Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders! 😀
  • Show all items from Wolf Tooth
4 - 5 weeks delivery time

ready for sending in 1-3 business days

ready for sending in 1-3 business days

ready for sending in 1-3 business days

4 - 5 weeks delivery time