Product information "TSR22 Disc Skyline 2.0 front wheel" You are looking for an ultra-light Aluminium-wheelset with ceramic bearings and great comfort for longer rides? Our TSR22 Disc Skyline have been designed for you!
Equipped with our lightest Princess and Prince Skyline hubs produced with Carbon ring reinforcements and Carbon Endcaps, this wheelset is a perfect climbing solution, moreover you will not lose any watts thanks to the three mounted ceramic bearings and the lightest SAPIM aero spokes. Last but not least to increase the lateral stiffness during out of saddle phases the spokes are tied with carbon fibres. Epic climbs and brevets are waiting for you.
Technical data front wheel
Weight: from 615g
Hub Type: Princess Skyline CL 24 holes with Carbon endcaps, Carbon reinforcement ring and Ceramic-bearings
Spokes: SAPIM CX-Super Black Aero
Max. Spoke Tension: 1100N
Max. rider weight: 90kg
Max. system weight: 100kg
Rim Inner Width: 19mm
Rim Outer Width: 24,2mm
Rim Height: 22mm
Rim standard: 700c clincher, 700c x 24,2mm, 622 x 19mm
Tubeless Ready: Yes
Recommended Width Tubeless Tape: 22mm
Recommended Length Tubeless Valve: 35mm
Tyres and max. pressure: 25mm/7,5bar 32mm/4,8bar - 50mm/3,8bar
Brake Interface: Centerlock* disc-brake interface, 6-Bolt with adapter
Colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
Note: Screw on the Centerlock* lockring and tighten it with max. 40Nm.
*Center Lock rotor mounting system licensed by Shimano
In case that the specific option you are looking for (e.g. CL/6-hole, freehub body or axle standard) is not listed we ask you to place the order using a dummy wheelset and drop a short comment regarding the configuration you exactly need.
The color is referring to the anodization color of the hubs.