Tune Schwarzbrenner 88 wheel set, a aerodynamic 88 mm high carbon rim gives this wheel set wings and doesn’t lets you behind in the wind.
A aerodynamic 88 mm high carbon rim gives this wheel set wings and doesn’t lets you behind in the wind! Schwarzbrenner 88, our most aerodynamic wheelset, for roadbikes and time trail bike.
All Schwarzbrenner full carbon rims are specially made for Tune and provide optimal brake performance. The extra wide and U-shaped rim cuts its way through the wind like a hot knife through butter.
Thanks to the generous 18 mm inner width of the rim all tires from 23 mm to 32 mm sit perfectly on the rim. Nothing holds you back from high cornering speeds, fast sprints and the fight against the watch.
For this combination we’ve drawn deep from the range. We use the awesome MIG70 and MAG170 together, laced with the ever-stylish SAPIM CX-Ray
The CX-Ray still receives the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. The middle section of the spoke is drawn then pressed in a special mold to form its specific profile. CX-Ray spokes are used by top bike racers and triathletes around the world. Even downhillers use them, recognizing their strength and flexibility. Special alloy treatment and sophisticated production make this all possible. The CX-Ray fits is all standard hub holes.
Tune good looks meets featherweight (1,370 grams) and stiff.
Our Schwarzbrenner wheels are come with special brake pads. Their tailored composition ensure you get best brake performance in all conditions.
The enormous stiffness, the high stability and excellent quality convince. All Schwarzbrenner are built up and trued by hand.
Even the rush of air won’t cool the hotness of our Schwarzbrenner Carbon Fibre wheelsets.
All Tune Schwarzbrenner wheel sets are approved for Cyclocross. We recommend the use of 24 spokes for the front and rear rim. Bearings
We use standard bearings. This means you can also buy bearings in Australia if you need to. Ours are just a little special, with two main differences:
- Our bearings have a higher fat filling grade. 30% is standard, whilst ours are filled to 50%. This not only prolongs their life, but also provides a better
- Standard bearings have variations in play from their production.
Tune bearings have the play specially determined dependent on their use. One single Tune bearing is not standard – the bearing in the free-wheel body on the left. It is constructed specifically to withstand high forces and last extra long.
|Hubs||MIG 70 / MAG 170|
|Rims||Schwarzbrenner 88C (Clincher)|
|Spokes||SAPIM CX-RAY, schwarz-chrom|
|Hole count||20 / 24|
|Nipples||Sapim, aluminium, in all Tune anodized colours|
|Lacing||front radial, rear 2-times cross|
|Max. rider weight||100 Kg|
|Inner width||18 mm|
|Outer width||28 mm|
|Rim height||88 mm|
|Rim tape width||18 mm|
|Tire pressure||23 mm 8,0 bar/ 116 psi|
| ||24 mm 7,4 bar/ 117 psi|
| ||25 mm 7 bar/ 107 psi|
| ||28 mm 6 bar/ 90 psi|
| ||32 mm 4 bar/ 60 psi|
|Tire widths||min. 23 mm / max. 32 mm|
|Brake pads||inkl. 4 x SwissStop Yellow King|
In case that the specific option you are looking for (e.g. CL/6-hole, freehub body or axle standard) is not listed we ask you to place the order using a dummy wheelset and drop a short comment regarding the configuration you exactly need.
The color is referring to the anodization color of the hubs.