tune Princess front hub Centerlock standard

Product information "Princess CL front hub"
The Princess is chosen by elite racers around the world! A super light hubshell, Ceramic- or Endurance-bearings, Carbon flange-reinforcement and different endcaps offer you countless customizing options. Now available for the popular Centerlock* disc-brake mount! Each material was selected to achieve the lowest weight possible. The aerospace grade Aluminium with increased fatigue strength has been used to obtain the fine geometrical tolerances and the complex shape. The flange geometry has been optimized to increase the lateral stiffness of the wheel. Just like any Formula One car this hub is ideal for competition and just like any race car this hub needs an inspection after each "Grand Prix" in order to maintain its top performance.

Technical data

• Colours: available in all Tune anodised colours
• Max. rider weight: 90kg
• Max. system weight: 100kg
• Weight: from 78,2g 12x100mm CL
• Hole count: 24 holes with radial pattern on the right side and for 2-cross pattern on the left side, 28 holes or 32 holes with radial pattern on the right side and for 3-cross pattern on the left side
• Max. spoke tension: 1100N
• Axle type: 12x100mm and 15x100mm with Aluminium endcaps
• Bearing Type: Endurance-bearings
• Brake type: disc brake Centerlock*
• Brake Interface: Centerlock* disc-brake interface, 6-Bolt with adapter
• Recommended spokes: Sapim CX-Ray, D-Light or equivalent spokes
• Note: Screw on the Centerlock* lockring and tighten it with max. 40Nm.

Dimensions for Centerlock with axle type 100mm

• Flange distance left: 20,7mm
• Flange distance right: 32,4mm
• Pitch circle left: 51,6mm
• Pitch circle right: 28,2mm
• Diameter spoke holes: 2,4mm
• Offset spoke hole left: 1,5mm
• Offset spoke hole right: -

*Center Lock rotor mounting system licensed by Shimano

---