tune Prince rear hub Centerlock standard

Product information "Prince CL rear hub"
The Prince CL is chosen by elite racers around the world! A super light hubshell, Ceramic- or Endurance-bearings and a reinforced freewheel body offer you superb race-day performance! Now available for the popular Centerlock* disc-brake mount! Each material was selected to achieve the lowest weight possible. The aerospace grade Aluminium with increased fatigue strength has been used to obtain the fine geometrical tolerances and the complex shape. The flange geometry has been optimized to increase the lateral stiffness of the wheel. Just like any Formula One or Rally cars this hub is ideal for competition and just like any race car this hub needs an inspection after each "Grand Prix" in order to maintain its top performance.

Technical data

• Colours: available in all Tune anodised colours
• Max. rider weight: 90kg
• Max. system weight: 100kg
• Weight: from 184,7g in 12x142mm CL
• Hole count: 24 for 2-cross lacing, 28 or 32 for 3-cross lacing
• Max. spoke tension: 1100N
• Axle type: available in 5x135mm and 12x142mm with Aluminium Endcaps
• Bearing Type: left side Endurance-bearings, right side Standard-bearings
• Freewheel type: lightweight 3Teeth Skyline, Endurance reinforced freewheel body or 6Teeth Skyline freewheel with increased number of engagement points
• Freewheel standard: available with Campagnolo, Campagnolo N3W, XD, XDR, Shimano HG10, Shimano HG11 or Shimano MicroSpline
• Brake type: disc brake Centerlock*
• Brake Interface: Centerlock* disc-brake interface, 6-Bolt with adapter
• Recommended spokes: Sapim CX-Ray, D-Light or equivalent spokes
• Note: Disc rotor lockring max. torque: 40Nm

Dimensions for Centerlock with axle type 135mm and 142mm

• Flange distance left: 32,4mm
• Flange distance right: 19,2mm
• Pitch circle left: 47mm
• Pitch circle right: 57mm
• Diameter spoke holes: 2,4mm
• Offset spoke hole left: 1,5mm
• Offset spoke hole right: 1,5mm

*CenterLock and Microspline licensed by Shimano

---