tune BlackBurner 28 Endurance 29er rear wheel Prince 28H

Product information "Blackburner 28 Endurance 29" rear wheel"
Our BlackBurner28 Endurance offers a modern extra-wide carbon rim to make your XC-racebike ride like on rails! The combination will ultralight hubs will ease your accelerations too!


The different components of the BlackBurner28 Endurance 29" haven been designed and chosen to obtain the a superlight carbon wheelset with wide rims to match any lightweight racebike. Concerning the lateral stiffness, the 32 SAPIM CX-Super aero-spokes spokes on the front wheel and on the rear wheel, our posh Prince/Princess hubs coupled with the carbon rim with 28mm inner width make the wheelset super stiff and superlight. The rims with beautiful UD finish show the craftmanship required during production. As the BlackBurner28 Endurance 29" are available in all Tunes colours, take the chance to personalize your ride.


Technical data rear wheel

• Weight: from 744g
• Hub Type: Prince 32 holes with Endurance bearing on the left side
• Spokes: SAPIM CX-Super Black Aero
• Max. Spoke Tension: 1100N
• Max. rider weight: 90kg
• Max. system weight: 105kg
• Rim Inner Width: 28,00mm
• Rim Outer Width: 33,50mm
• Rim Height: 22,00mm
• Rim standard: 29", 622x28mm
• Tubeless Ready: Yes
• Recommended Width Tubeless Tape: 30mm
• Recommended Length Tubeless Valve: 44mm
• Tyres and max. pressure: 2,2"/2,75bar 2,25"/2,7bar - 2,35"/2,5bar
• ERD (measured for Tune Spoke Simulator): 595mm
• Axle type: available in 5x135mm, 12x142mm or 12x148mm
• Nipples: SAPIM Anodized, Polyax, 12mm
• Freewheel types: 3Teeth Titanium Technology, reinforced Endurance freewheel body
• Freewheel standard: available with XD, XDR, Shimano HG10, Shimano HG11 or MicroSpline
• Brake Interface: 6-Bolt or Centerlock* disc-brake interface
• Notes: for Tubeless Tires only (with or without inner tube)
• Colours: for hubs, nipples and Tune decals, available in all Tune anodised colours

*Center Lock rotor mounting system licensed by Shimano

---

---