You have two MTB Bars to choose from: a classic flat center rise bar and a 12mm riser bar in carbon for strength and all day ride comfort. They’re the perfect bars for your X4 stem.
We’ve created two carbon fiber bars for the Mountain Bike enthusiast: a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop for 29 inch bikes. They also have 6° of backsweep for comfort and 730mm (29") in width for plenty of leverage.
The second model is 750mm wide and offers 12mm (1/2 inch) of rise together with a 6° backsweep and 4° upsweep. It’s built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing.
The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed.
The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.
1 reviews for Thomson MTB carbon handlebar 31.8mm with an average rating of 5/5 points.
Thomson offers you a best quality for money I used this bar on the street aggressively and had no problems with it, carbon is thick and solid, however i cut it to 64 cm after a week of riding Be accurate when mounting stuff on this bar, because you can make scratches Weight after cut to 64 cm with vans cult grips is about 280 grams ★★★★★ Nick