Schmolke TLO FullOversize road bar 46cm

Show all items from Schmolke
  • Just like the Oversize model, the new FullOver has a larger cross sectional profile reaching from the bar mounting to the mid section of the bar, resulting in a perceptible increase in stiffness. In addition the drop section of the bar is tapered down only to a diameter of 27,5 mm instead of the usual 24 mm. The Advantages are obvious – the larger diameter increases the stiffness of the handlebar’s drop section even further. Especially for riders with larger hands another convincing benefit is the much more pleasant grip sensation in the dropped position.

    The construction of the bar’s top section allows the brake levers to be mounted in a way that the levers and the handlebar merge perfectly. This special top section construction makes the levers point more upwards, resulting in a higher comfort when riding in the lever position.
    The additional weight of 5 g in comparison to the other TLO bars is being more than compensated due to the special carbon bindings for the shifters. The weight advantage of theses bindings is 18 g and is included in delivery.
    The drop of the bar is 138 mm, its reach measures 95 mm. The FullOver has integrated cable grooves for proper cable housing installment.

    Our TLO series is manufactured to suit your weight and riding style, using the best carbon fiber Prepregs available (about carbon). Together with a further refined layering plan with fewer layers, this results in yet another weight reduction. The bars clamping diameter is 31.8 mm and is also allowed to be mounted on stems with four clamping bolts.

    For these thin walled handlebars we offer our custom made oversize carbon bar plugs.
    For now the FullOver will be manufactured only in 46 cm width (measured outside).

    Please keep in mind that we measure our road bars from outside to outside. Our standard handlebars are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please inform us when placing your order. The necessary strengthening will add some 8 g to the bar’s weight (for more information see special handlebars).

    If desired, we can also custom fit your bar with longer ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends.

    • Continuous 31,8mm upper section. Lower region reduced to only 27,5mm instead of the usual 24mm. Thus a higher stiffness is attained as well as a more comfortable grasp.
    • size: 46 cm
    • weight: 135-155 g
  • Rate this product

    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!
    • By default we send all Schmolke bars and seatposts with 1k finish. If you want 3k or UD carbon finish (appr. 2 weeks manufacturing delay) just drop a short comnment when you check out.

    • By default all Schmolke bars and seatposts can be used up to 85 KGs rider weight. if you want the S (enhanced) version (up to 110 KGs; 5 to 7 grams heavier) just drop a short comment when you check out.
  • Attachements
    road bar oversizedinstruction manual
    216.92 KB
    road barinstruction manual
    237.12 KB
    road bar oversizedinstruction manual
    215.59 KB
    road barinstruction manual
    236.06 KB
  • Customers who viewed this also viewed:
Almost worldwide delivery
Large stock & affordable prices
You are here:
Home  >  Components  >  Handlebars
Login  /  Register
This item is crafted in Germany