Salsa Fargo frameset 27.5+/29er black

Fargo is our original drop bar mountain bike. A bit of a cult classic, it’s designed for mixed surface riders and bikepackers who want the versatility to take any route and the capability to carry everything needed when they’re out for days on end. The Fargo frameset is a feature-rich platform that lets you build your dream machine from the ground up — where will it take you?

• Design Wheel/ Tire Size: 29 x 2.4"
• Alternative Wheel/ Tire Size: 27.5 x 3.0", 29 x 2.4" w/ fender (29 x 3.0" only compatible on SM–XL frame sizes)
• Suspension Fork Length (Travel): 501–511mm (100mm)
• Rigid Fork Length: 483–486mm
• Fork Offset: 45–51mm
• Headset-Upper: ZS44
• Headset-Lower: EC44
• Seatpost: 27.2mm
• Seat Collar: Steel: 30mm / Ti: 32mm
• Front Derailleur Mount: 148mm rear spaced: high direct mount (29mm offset) Problem Solvers Bracket (FS1328) / 142mm rear spaced: high direct mount (26.5mm offset) via 28.6mm clamp Problem Solvers Bracket (FS1326)
• Bottom Bracket: 73mm BSA, threaded
• Crankset (Max Ring): 1x crankset: 36t max Boost & 34t non-Boost or 46t Gates Belt Drive Sprocket, 2x crankset: 42/28t max Boost & Non-Boost
• Rear Brake, (Rotor): 51mm I.S. (160–180mm)
• Rear Spacing: 148 or 142mm thru-axle / 135mm QR w/ Alternator reduction plates
• Rear Axle Size: 148mm rear spaced: 12 x 180L, TP = 1.5**, TL = 20 / 142mm rear spaced: 12 x 174L, TP = 1.5**, TL = 20 / 135mm rear spaced: quick release / 142 & 135mm spacing require the use of Salsa Alternator Reduction plates (FS2360) **Pre-2022 Fargo models use Alternator plates and thru-axles with 1.75 TP (thread pitch). Both 1.5 and 1.75 TP plates are compatible with the Fargo frame. Ensure TP of plate and axle match before installing.
• Derailleur Hanger: QR = FS1312; TA = FS1385 (1.75TP with fender mount); SS = FS1318; SSTA = FS1375; L Rohloff = FS1371
• Fender Mounts: Yes
• Rack Mounts: Yes
• Bottle Mounts: 4 (3-Pack config)
• Stem Clamp: 28.6mm
• Crown Race: 40mm
• Front Brake (Rotor): 74mm post mount (160–180mm)
• Front Spacing: 110 x 15mm thru-axle
• Front Axle: ø15 x 135, TP=1.5, TL=12