BBright - Press Fit - Shimano
If you have a Cervélo, chances are your bike has the BBright bottom bracket standard. P5s don’t; same with older frames. Fitting SRAM and Quarq cranks into this 75mm wide, 42mm diameter shell, this bottom bracket, complete with CeramicSpeed bearings, needs to be pressed in.
In The Box
- 1 bottom bracket with bearings installed
- 2 dust covers
- 1mm spacer
- 0.5mm spacer
- GXP wave washer
- Spacer tube
- 10ml syringe of All Round Grease
- Sticker sheet
- Frame: BBRight
- Opening diameter: 46mm
- Shell width: 79-92mm
BBright is a variation on BB30, only wider on the non-drive side. SRAM and Quarq cranks have a 24/22mm step-down spindle and these cups make it possible to install those cranks on most Cervélos.
The Standard Bearings last at least 3x longer than other bearings. Credit goes to hardened-steel races and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. These feature a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most bb's.
The Coated Bearings are slicker; they reduce drag by 50% versus Standard, an improvement in bearing life of 60%.
Grease comes mixed with the bearings and can be changed. All Round Grease is standard, & can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.