CarbonTi X-Hub SP straightpull disc 6-hole hub rear

X-Hub SP Disc Rear - 185g

X-Hub SP Disc Rear XD is a very light and sophisticated product and it is intended for Cross Country or Marathon use. Warranty voids when used on an electric-assisted bicycle (E-bike). X-Hub SP Disc Rear XD is compatible with the classic standard quick release, however it is possible the conversion to the X-12 standard, only replacing the axle (cod. XHMSLRAXN) and its end axle (cod. XHMSLRCLN). The fixing system of the disc rotor is six holes International Standard. This Hub is compatible with SRAM XD cassettes and allows conversion with SRAM 10s and Shimano 10- 11s MTB cassettes (with 1.8 mm spacer only), 11s SRAM/Shimano Road or Campagnolo 11v. X-Hub SP Disc Rear XD presents refinements and a mechanical stiffness/weight ratio at the highest level, the Al7075-T6 body is machined from solid and is lightened by meticolous works with CNC machines. The Al7075-T6 17 mm diameter axle has a variable thickness, two high quality sealed bearings, with an external preload system that provide reliability and smoothness. The freewheel mechanism is protected by a lip seal and itis provided by a titanium toothed ring to 56 teeth with four points of engagement.

Product Specification

• Spoke hole drilling: 24
• Spoke hole: Ø 2.5 mm
• Disc flange drilling: Ø 48 mm
• Right flange drilling: Ø 54.50 mm
• Axle diameter: 17 mm
• Axle width: 135 mm
• Frame attachment: quick release X-12 Conversion kit: available
• Disk attachment: International Standard (6 holes)
• Recommended hub spoke tension: 120 KgF (Max 130 Kgf)
• Recommended rotor bolt tightening torque: 4 Nm w/med. threadlocker (Max 5 Nm)