CarbonTi X-Hub SL disc 6-hole hub rear X-12

X-Hub SL Disc X-12 - 192g-196g

X-Hub MTB SL Rear is a very light and sophisticated product and it is intended for Cross Country Marathon uses. Warranty voids when used on an electric-assisted bicycle (E-bike). X-Hub SL Disc X-12 is compatible with the Disc X-12 standard, however it is possible the conversion to the classic standard quick release, only replacing the axle (cod. XHMSLRAXN) and its end axle (cod. XHMSLRCLN). The fixing system of the disc rotor is six holes International Standard. X-Hub SL Disc X-12 presents refinements and a mechanical stiffness/weight ratio at the highest level,the Al7075-T6 body is machined from solid and is lightened by meticolous works with CNC machines. The Al7075-T6 17 mm diameter axle has a variable thickness, two high quality sealed bearings with an external preload system that provide reliability and smoothness. The freewheel mechanism is protected by a lip seal and is provided by a titanium toothed ring to 56 teeth, with four points of engagement.

Product Specification

• Spoke hole drilling: 24/28/32
• Spoke hole: Ø 2.5 mm
• Flange drilling diameter: Ø 54.50 mm
• Axle diameter: 17 mm
• Axle width: 142 mm
• Frame attachment: 12mm thru axle
• quick release
• Conversion kit: available
• Disk attachment:
• International Standard (6 holes)
• Recommended hub spoke tension: 120 KgF (Max 130 Kgf)
• Recommended tightening rotor bolt tension: 4 Nm w/med. threadlocker (Max 6 Nm)