AX Lightness Selection 28C clincher disc road wheelset TL-Ready

Show all items from AX Lightness
    You can find more information about what there is exactly included in delivery on the left-side menu.
  • Selection Disc 28C TLR

    The wheelsets of our SELECTION line represent the entry into the ax-lightness wheelset family.
    Nonetheless it is not being cut back on the quality or qualities of the wheels. The Selection wheels share our same high-end German-made rims that shine with their unparalleled lightness and high stability.

    The SELECTION wheelsets are a synonym for an uncompromising reliability even under severe conditions, without sacrificing the special ax qualities such as light weight, high stiffness or low moment of inertia.

    On the hub side for MY2018 we are resorting to our own disc hubs that manage to score with their low weights of just 150 respectively 287 g but especially with their high versatility thanks to adapters for various axle standards.
    Thanks to their refined geometry and multi-sealed ball bearings the hubs boost a high stability and suitability for daily use and therewith form an optimal complement to our SELECTION wheelsets.


    Selection Disc 28C TLR - A completely new development! Thanks to a CfD-optimized rim profile our ax 28C TLR Clincher rims offer an exceptional aero performance that matches those of significantly deeper rims.

    The low weight, which so far has only been reserved for tubular rimsm makes them miraculous accelerators and very reactive. The high stability is responsible for not wasting a single bit of energy or and a high steering precision.

    The massive width of 26 mm is responsible for a high stability and stifness. The huge internal width of 16.5 mm allows the tire to evolve in a very advantageous shape that not only allows to ride with a lower pressure without bulking under load or in corners, but at the same time increases the comfort and yields a reduction in rolling resistance.

    Our new 2018 version makes use of a completely re-designed rim bed and therewith also allows the use of tubeless tires (TLR). The pronounced hooks lock the tires firmly in place and allow for an easy installation and sealing.
    The wheels are factory shipped with tubeless tape - of course as before they are also compatible with conventional tire/tube combinations for a maximum flexibility.

    Our road clincher rims have already proven their extreme strength by winning the latest carbon wheel test shootout in Tour-Magazin (Tour 10/2017) - being one of only five of the 22 tested sets to pass the impact testing, yet by far the lightest.
    Each rim us individually tested at a tire pressure of 12 bar prior to dispatch which is a testament to their extreme stability.

    All of this make the Selection Disc 28C TLR to the absolute king of mountain!


    Specifications - Selection Disc 28C TLR
    Weight (+/- 5 %)1410 g/set
    Rimsax 28C TLR
    Rim materialFull Carbon
    Tire typeClincher
    Brake typeDisc brake - 6-Bolt
    Rim depth28 mm
    Rim width26 mm
    Rim internal width16.5 mm
    Hubsax HDA-017
    Freehub bodyShimano/Sram
    Axle standard frontQR, 12mm thru-axle, 15mm thru-axle
    Axle standard rearQR, 142x12 thru-axle
    SpokesDT Swiss Aerolite, black
    NippleDT Swiss Pro Lock hidden, internal
    Spoke tension140 kgf
    Spoke count (f/r)24 / 24
    Field of useRoad
    Rider weight limit100 kg
    Finish3K
    Decal colourwhite
    Max. recommended tire pressure22mm 8.0bar; 23mm 7.5bar; 25mm 7.25bar; 28mm 7.0bar



    Laminated spoke holes

    Instead of simply drilling the spoke holes of our rims, we take a different approach with our rims: Every single spoke hole is crafted by hand and reinforced with strategically placed reinforcement patches.
    The advantage is obvious: Where carbon is being drilled, one inevitably also cuts through fibres. A continuous fibre flow however is essential for the material to play its advantages such as the high tensile strength, even more indispensable for nipple holes that are exposed to high spoke tensions. Specifically crafted nipple seats allow an optimal orientation of the nipples and at the same time distribute the occurring forces evenly into the rim bed.

    Independent testing at an university lab has confirmed the performance of this time and labour intensive approach: The rim is capable of withstanding nipple pulling forces of over 5000 N - circa twice as much as the best competitor and more than every hub flange or spoke would be able to endure. As a result our rims do not carry any spoke tension limit!

    Us ourselves we are building our wheels with up to 140 kg of a spoke tension: A guarantor for you to have long-lasting joy with your wheels. The higher the spoke tension, the lesser the opportunity for a spoke to be unloaded upon an overload of the wheels (e.g. from a compression such as an obstacle, pothole or anything alike) and the wheels to therewith come out of true. That way you are longer able to ride with your perfectly trued wheels. As an additional advantage there also is minor increase in stiffness to be recorded.
    An effort that pays off!

    Hand-built

    All of our wheelsets are individually built by hand in our manufacture in Creußen, Bayern, to the tightest tolerances and with extremely high spoke tension. We refrain from the use of wheel building machines and invariably trust on the craftsmanship of specially qualified mechanics. The high experience with high-end-material allows a consistently high quality, the tight tolerance in lateral runout and radial runout a perfect runout and therewith a lot of joy with the wheels.
  • Rate this product

    •  
    • Unfortunately, there isn't any review yet. Be the first one and share your experiences with thousands of other riders!
  • All AX Lightness items will be delivered with the new logo
  • Attachements
  • Customers who viewed this also viewed:
Almost worldwide delivery
Large stock & affordable prices
You are here:
Home  >  Wheels  >  Wheels
Login  /  Register
This item is crafted in Germany