Xentis MARK3 SL disc Centerlock clincher tubeless ready 622x18C CeramicSpeed wheel

Xentis MARK3 SL disc Centerlock clincher tubeless ready 622x18C CeramicSpeed wheel

Aerodynamics like a full disc wheel, but still rapid uphill? Impossible....SL” stands for lightweight construction while MARK3 stands for monocoque construction. A combination results in MARK3 SL, the peak of monocoque performance. The bearing is a Ceramicspeed “coated” version. The result is a statement, helping athletes in every possible way to pursue neverknown speed.

The system is tubeless-ready, to benefit from the lowest possible rolling resistance as well. As usual with the MARK3 wheel series the hub housing is integrated in the carbon body. This ensures the most direct force transfer during acceleration and in braking situations.



Design: matt blue
Carbon fiber: 3K-Carbon
Dimension: 622 x 18C tubeless ready
Tyres: clincher 23-33mm
Max. tyre inflation pressure: 7,5 bar/108 psi (23-622) - 7,0 bar/101 psi (25-622) - 6,0 bar/87 psi (26-622) - 5,0 bar/65 psi (28-622) - 4,0 bar/65 psi (33-622)
Brake surface: none
Rim depth: 42 mm
Outer Rim width: 26 mm
Inner Rim width: 18 mm
Spoke count: 5
Hub front: XeNTiS XH004; 12-100mm, Center Lock
Hub rear: XeNTiS XH004; X12-142mm, Center Lock
Compatibility: Shimano / SRAM 11-Speed, Shimano 11/12-Speed, SRAM XD(R) 12-Speed, Campagnolo 11/12-Speed - depends on chosen freewheel above
Accessories: XeNTiS warranty card, XeNTiS Wheelbag, XeNTiS Rim tape, XeNTiS 3 Sticker-set
Weight per wheelset: 1.430g
Max. combined rider weight: 120kg