Kontaktieren Sie uns

THM Carbones Clavicula SE Rennrad Kurbel

In den Warenkorb

Artikel günstiger gesehen?

Dieser Artikel wird in Deutschland hergestellt
  • Die Vollcarbon-Kurbel ohne Kompromisse.

    THMs Top-Line, Vollcarbon-Kurbel mit integrierter Carbonachse ist wie keine andere konstruiert. In der Entwicklung konzentrierten sie sich auf die Optimierung der geometrischen und strukturellen Definition, basierend auf einer genauen Analyse der Lastpfade. Dadurch ist sie in allen Ebenen außerordentlich steif, genau das, was für eine verlustfreie Kraftübertragung erforderlich ist.

    Besonders stolz sind sie auf die patentierte Verbindung zwischen linker Kurbel und Achse - THM ist es erstmals gelungen, eine Carbon-Kohlenstoff-Schnittstelle im Herzen des Fahrradantriebsstrangs herzustellen. Die Ausrichtung der Fasern der Außen- und Innenverzahnung reduziert den Verschleiß auf nahezu Null und eliminiert Geräusche. Und natürlich ist sie leichter, 293 g mit Spindel. Die Clavicula SE schlägt alle THM-eigenen Benchmarks und ist die neue Referenz im Kurbeldesign.

    Sie passt zu jedem Rahmen mit Standard 68mm BSA-Schale. Erhältlich für BB30, BB30A, Pressfit30, Shimano Pressfit, Italienisches Gewinde, BB386 EVO, BBright-Pressfit. BBright Direct Fit (nur Cervelo-Rahmen R5ca) und BB 386 (nur AX Lightness-Rahmen ViAL EVO) sind ebenfalls erhältlich.

    ProduKt Informationen
    • Gewicht: ca. 302g (130mm) / 293g (110mm)
    • Achsendurchmesser: 30 mm
    • BCD: 5 Schrauben 110mm oder 130 mm
    • Q-Faktor: 148 mm
    • Kettenlinie: 43.5 mm
    • Innenbreite der Kurbeln: 118 mm
    • Verfügbare Längen: 170 / 172.5 / 175mm
    • Max. zulässiges Gesamtgewicht (Fahrer + Fahrrad + Gepäck): 120kg


  • Produkt bewerten

    Produkt bewerten



    7 Erfahrungsberichte für THM Carbones Clavicula SE Rennrad Kurbel bei einer durchschnittlichen Bewertung von 4.4/5 Punkten.

    • stiff, lightweight, gorgeous
      The best crank in the world! Very stiff, superlight, gorgeous. The 172.5mm crank with matt finish weight just 395g ap.. Currently, it's the lightest crank I have ever seen. Once combined with carbon-ti chain rings, you get the best crankset!
         Rex   

    • Really nice to fast shipping and great support.
         Kane   

    • Siffness and Lightweight
         macrogun   
    • read above
      2 flaws in this crankset:

      1. SPACER CONE, THAT GETS INSERTED INSIDE THE AXLE ON THE NONE DRIVE SIDE. The plastic cone is too wide & what ends up happening is that once it is inserted in the BB, it is so tight that once the crankset is assembled and spin the crankset, it will only do 1/2 a revolution, which indicated that the plastic is preventing the bearings from spinning & it even gets worst when you start pedaling, as if the brakes are being applied.
      So what you will have to do is take the spacer cone and sand it down w/ a sand paper in the outside to remove the excess plastic. Once you achieve by removing the right amount of plastic, watch it spin freely, the way it should be.

      2. COVER PLATE:
      The cover plate that is in the non-drive side has so much stress during the pedaling process. The plate is what keeps the crankset whole or intact, (FYI, that pinch bolt that is attached to the non-drive side crank arm does nothing)
      so every time your:
      == standing up and rocking the bike left / right & your right foot is at
      6 o clock and the frame is leaning to the right, at that point you are actually pulling the HEAD plate with your feet, & at that point the head plate & nut end that gets screwed in the axle will separate (it will take time, for me about 3000 miles).
      == the other one, is when you're doing a very sharp cornering to the left, and take your body and lean to the right & your feet at 6 o clock.
      Luckily when the head plate separated from the nut end, I was on the flats (all I heard as if a coin fell on the ground and I was like, what was that, till 3 block later I noticed the head gone and I thought that the whole thing came loose and fell off, while in actuality, it broke in half). & I was surprised that the
      non-drive side crank did not come off for the next 10 miles (please note, the non-drive side crank will come loose and the crankset will come off the frame at some point, so go straight home, do not finish your ride). Can you just imagine if that were to happen on the turns or during a climb.
      Also the nut end, will not be a problem removing it inside the axle, you can just take an Allan wrench to remove it.

      After this happens, you will not be able to ride your bike till you replace the part. So since this happened, it is safe to say, you best purchase several of these plates, as this will be a REOCCURRING PROBLEM.

      Bottomline, if my AX Lightness frame, could accept a Campagnolo crankset, I would do a way with this product, as well as these light components as they are nothing but a headache, even thou light in weight, they either don't function properly or don't function at all, longevity is an issue & not to mention poor quality. In the end you're just throwing money away.
      NO offense to the Germans, the idea & concept is great, but there are flaws to the ideas that are not address during the R&D phase, but then again, I believe they are aware of these flaws and just don't care.

         armando    
    • Zero Complaints.
      I have two sets and have not had one single problem over thousands of miles. They are incredibly light, stiff, and in my view the best looking cranks on the market. Of course I did not trust myself to install these myself and had my mechanic do it (he's been working on bikes for probably 40 years), so that may be why I've never had an issue.
         Tim   
    • a must for all ww machines
      i bought the compact 170mm crank length, came in mass wise a few grammes heavier than advertised but my scales are basic things. very happy with the crankset
      put the extralite chain rings on with kcnc bolts looks old school boss.
      only thing for me is the thm crankset for the bb30a. it is 100g ish that eats into those vital mass loses on a 4 kilo bike.
      stiff enough for me but i have over cooked noodles for legs
      a must for all ww machines

         rotten rouleur   
    • ++++++absolutely recommended for weightweenies
      Just the product for anyone who watches weight and wants reliability on carbon.
         Ivan   
    • 1x Clavicula SE Kurbel
    • Spacer
    • OHNE Innenlager
    • OHNE Kettenblätter
  • Alle Artikel von THM Carbones anzeigen
40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit

AUF LAGER
sehr hohe Nachfrage nach diesem Produkthohe Nachfrage

40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit
Wir haben diesen Artikel bereits vor einiger Zeit nachbestellt und jene Bestellung wurde noch keinem Kunden zugewiesen. Falls Sie den Artikel reservieren möchten bestellen Sie ihn einfach.

40 - 50 Wochen Lieferzeit
Wir haben diesen Artikel bereits vor einiger Zeit nachbestellt und jene Bestellung wurde noch keinem Kunden zugewiesen. Falls Sie den Artikel reservieren möchten bestellen Sie ihn einfach.

40 - 50 Wochen Lieferzeit

40 - 50 Wochen Lieferzeit